Dell 1545 - Inspiron - Pentium 2 GHz Setup Manual page 41

Setup guide
Hide thumbs Also See for 1545 - Inspiron - Pentium 2 GHz:
Table of Contents

Advertisement

Starting Dell Diagnostics From Your Hard Drive
The Dell Diagnostics is located on a hidden
diagnostic utility partition on your hard drive.
NOTE: If your computer cannot display a
screen image, see "Contacting Dell" on
page 53.
Ensure that the computer is connected to an
1.
electrical outlet that is known to be working
properly.
Turn on (or restart) your computer.
2.
3.
When the DELL
logo appears, press <F12>
immediately. Select Diagnostics from the
boot menu and press <Enter>.
NOTE: If you wait too long and the operating
system logo appears, continue to wait until
you see the Microsoft
then, shut down your computer and try again.
NOTE: If you see a message stating that no
diagnostics utility partition has been found,
run the Dell Diagnostics from the Drivers
and Utilities disc.
Windows
desktop;
®
®
4.
Press any key to start the Dell Diagnostics
from the diagnostics utility partition on your
hard drive.
Starting Dell Diagnostics From the Drivers and
Utilities Disc
Drivers and Utilities disc.
1.
Insert the
Shut down and restart the computer.
2.
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
NOTE: The next steps change the boot
sequence for one time only. On the next
start-up, the computer boots according to
the devices specified in the system setup
program.
When the boot device list appears, highlight
3.
CD/DVD/CD-RW and press <Enter>.
Using Support Tools
Windows
®
®
39

Advertisement

Table of Contents
loading

Table of Contents