Connecting the TV Tuner and FM Radio
(TV tuner and/or FM tuner not available with all models)
Connectors and cables required for the TV tuner may vary. You may need to
purchase the appropriate adaptor, splitter, A/B switch, or combination to
complete the setup of your TV tuner card or external USB device.
Disconnect the television signal source from your TV or VCR system.
Reconnect this cable to the TV tuner card cable/antenna connector on the
back of your PC or external USB device.
Note: InterVideo Home Theater automatically detects whether your computer
has a TV tuner card installed. If not, then the TV & Radio features will be dis-
abled. For more information about how to connect the TV tuner card, please
refer to the TV tuner card instructions from your TV tuner package.
InterVideo Remote Control
(Remote control optional with select models)
Open the back cover of the remote control
and insert two AAA batteries (alkaline batter-
ies are recommended).
Plug the remote control receiver into any
available USB port on your computer.
Your remote control is ready to use.
Note: When using the remote control make sure that there is nothing blocking
the path between the remote control and the receiver unit.