VAIO® System Reference Manual
Hold the add-in card by its edges, and do not touch any components or
connector contacts on the card. Static electricity in your body may
damage sensitive components on the card. As a precaution, touch any
exposed metal part on the metal chassis (preferably the metal part on
the power supply) before handling an add-in card to discharge any static
electricity in your body.
If you do not replace the card or install another add-in card, install a
slot cover over the vacant slot at the rear of the chassis (see
an Open I/O Slot"
Replace the side panel (see
on page 40).
"Replacing the Side Panel"
on page 25).