Dodge 2009 Challenger Owner's Manual page 23

Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver's door or both doors on the first press of the
UNLOCK button on the transmitter. Refer to "Remote
Key Unlock," under "Personal Settings (Customer-
Programmable Features)," under "Electronic Vehicle In-
formation Center (EVIC)" in Section 4.
When not using the EVIC, perform the following
steps:
1. Press and hold the LOCK button on a programmed
transmitter for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the UNLOCK button
while still holding the LOCK button.
2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle by press-
ing the LOCK/UNLOCK buttons on the transmitter with
the ignition switch in the LOCK position and the key
removed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21
4. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Pressing the LOCK button on the transmitter
while you are inside the vehicle will activate the Security
Alarm. Opening a door with the Security Alarm activated
will cause the alarm to sound. Press the UNLOCK button
to deactivate the Security Alarm.
Flash Lights with Remote Key Lock
This feature will cause the turn signal lights to flash when
the doors are locked or unlocked with the transmitter.
This feature can be turned on or turned off. Refer to
"Flash Lights with Remote Key Lock," under Personal
Settings (Customer-Programmable Features)," under
"Electronic Vehicle Information Center (EVIC)" in Sec-
tion 4.
2