Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 95

Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Click Add Administrator.
c.
The Add Administrator page opens.
Add a new administrator and grant all administrative privileges to the administrator.
d.
Note
Warning
Insert the ACS SE 4.1 Upgrade CD into the CD-ROM drive on the distribution server (the server from
Step 4
which you are performing the upgrade).
Download the ACS Management Upgrade package:
Step 5
Open the upgrade CD.
a.
Go to the /Upgrade Appliance management ACS 4.1 folder.
b.
Double-click the autorun.bat icon.
c.
The download utility starts. You are prompted to enter the hostname or IP address of the appliance,
as shown in
Figure 5-6
d. Enter the hostname or the IP address of the distribution server and then click Install.
The web interface starts.
Log in to the web interface.
e.
Choose System Configuration > Appliance Upgrade Status.
f.
The Appliance Upgrade page opens, as shown in
OL-9969-03
When you create a GUI administrator account, you will have two administrator accounts for the
ACS SE: one each for a GUI and CLI.
If you do not have a GUI administrator account; then, after the upgrade is complete, you will
not be able to log in to the ACS SE from the web interface.
Figure 5-6.
Appliance Prompt
Figure 5-7.
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Upgrade Procedure
5-9