Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 110

Checking Command Syntax
Checking Command Syntax
The serial console interface provides several types of responses to incorrect command entries. If you
enter a:
•
•
•
In addition, some commands have command-specific error messages that notify you that a command is
valid, but that it cannot run correctly.
System Help
You can obtain help by using the following methods:
•
•
Installation Guide for Cisco Secure ACS Solution Engine 4.1
C-2
Command line that does not contain any valid commands, the system displays
Valid command but omit required options, the system displays
Valid command but provide invalid options or parameters, the system displays
For a list of all commands and their syntax, enter help, and then press Enter.
For help on a specific command, type the command name, a space, and a question mark (?), and then
press Enter, for example, show?. The help contains command usage information and syntax.
Appendix C Command Reference
Command not found
.
Incomplete command
Invalid input
OL-9969-03
.
.