Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 101

Chapter 5 Upgrading and Migrating to Cisco Secure ACS Solution Engine 4.1
Migrating ACS SE on the ACS 1111 or ACS 1112 Platform to ACS
SE 4.1 on the Cisco 1113 Platform
The ACS SE 4.1 release uses the Cisco 1113 platform. ACS SE on the Cisco 1113 platform can only run
the ACS 4.0.1 software release or the ACS 4.1 software release. Table 5-2 indicates the Cisco Secure
ACS software versions that each Cisco Secure ACS SE platform supports.
Table 5-2
Cisco Secure ACS
Solution Engine Platform
Cisco 1111
Cisco 1112
Cisco 1113
To migrate ACS software running on a previous SE appliance platform (the Cisco 1112 or the Cisco
1113) to run on the Cisco 1113 platform:
Upgrade the software on a previous SE hardware platform (the Cisco 1111 or the Cisco 1112) to ACS
Step 1
version 4.1 by using the full upgrade method. For information on this method, see
page 5-4
Back up the software on the previous SE hardware platform.
Step 2
On the new hardware platform—the Cisco 1113 platform:
Step 3
a.
b.
For information on Steps 2 and 3, see
OL-9969-03
Migrating ACS SE on the ACS 1111 or ACS 1112 Platform to ACS SE 4.1 on the Cisco 1113 Platform
Supported Versions
Install the ACS SE 4.1 version, or use the existing ACS SE 4.1 installation (which is preloaded on
the Cisco 1113).
Use the ACS restore feature to restore the information that was backed up in
Cisco Secure ACS Cisco Secure ACS
version 4.0.1 and 4.1 version 3.3
Yes Yes
Yes Yes
Yes No
Migrating from ACS for Windows to ACS SE, page
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Cisco Secure
ACS version 3.2
Yes
No
No
Upgrade Procedure,
Step 2.
5-13.
5-15