Table of Contents
Advertisement
2.1
Detaching the arm/stand (for VESA
wall mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To.detach.the.arm/stand:
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
Figure 1
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load
12.8kg (Screw size: M4 x 12 mm).
ASUS PA238Q Series LED Monitor
Figure 2
2-1
Hide quick links:
Advertisement
Table of Contents
