Press and hold
1.
Press and hold MENU/CALL to display the Call menu.
2.
Select Test.
3.
The radio displays the names listed in your directory; use CHANNEL UP and
CHANNEL DOWN to choose the directory entry you want to send a test call to and
press ENTER-H/M/L .
4.
If you want to send a test call to a station that is not in your directory, select
Manual. The radio prompts you to enter the MMSI number you want to call. Enter
the MMSI number the same way you enter directory entries (see page 22). Enter
all nine digits and press ENTER-H/M/L .
5.
The radio displays the MMSI number you are about to call and asks you to
confirm. If you want to call the displayed number, select Send. To cancel the call,
select Exit.
6.
The radio automatically switches to channel 70 to transmit the test call request,
then switches back to the last-used channel.
7.
When the other station acknowledges the test call, the radio displays an
acknowledgement screen.
Receiving Test Call Setup
When another station sends you a test call, you can select options to answer the test
call manually or have the radio answer automatically.
Press and hold
Press and hold MENU/CALL to display the Call menu.
8.
Select DSC Setup and then Test Reply.
9.
Choose Auto and press ENTER-H/M/L . The radio will automatically send an
acknowledgement when it receives a test call.
10. To disable automatic test call reply, repeat the steps above and select Manual.
Uniden MHS135DSC Radio Owner's Manual
Test
[Manual]
JIM CASSIDY
Test
KENT NEWMAN
Back
[MENU]
Test Reply
DSC Setup
Auto
Test Reply
Manual
Back
[MENU]
16
USA
Select
Exit
[CLR]
[ENT]
18
A
USA
Select
Exit
[CLR]
[ENT]
E-23