To Set At A Desired Speed; To Deactivate; To Resume Speed; To Vary The Speed Setting - Dodge 2006 Caravan Owner's Manual

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Set At A Desired Speed:

When the vehicle has reached the desired speed, press
and release the "SET" button. Release the accelerator and
the vehicle will operate at the selected speed.

To Deactivate:

A soft tap on the brake pedal, pushing the "CANCEL"
button or normal braking while slowing the vehicle will
deactivate the speed control without erasing the set
speed memory. Pushing the "ON/OFF" button to the
OFF position or turning off the ignition erases the set
speed memory.

To Resume Speed:

To resume a previously set speed, push and release the
"RESUME/ACCEL" button. Resume can be used at any
speed above 25 mph (40 km/h).

To Vary the Speed Setting:

When the speed control is set, speed can be increased by
pressing and holding the "RESUME/ACCEL" button.
When the button is released, a new set speed will be
established.
Tapping the "RESUME/ACCEL" button once will result
in a 2 mph (3 km/h) speed increase. Each time the button
is tapped, speed increases so that tapping the button
three times will increase speed by 6 mph (10 km/h), etc.
To decrease speed while speed control is set, press and
hold the "COAST" button. Release the button when the
desired speed is reached, and the new speed will be set.
Tapping the "COAST" button once will result in a 1 mph
(2 km/h) speed decrease. Each time the button is tapped,
speed decreases.