Remote Control - Pioneer VSX-822-K Operating Instructions Manual

1
1

Remote control

1
RECEIVER
SLEEP SOURCE
2
RECEIVER
3
INPUT
4
5
6
AUDIO
TOOLS
PARAMETER MENU
TOP
MENU
7
ENTER
8
HOME
MENU
PTY BAND
iPod CTRL
RETURN
MUTE
9
1 2 3
DISP
4 5 6 CH
10
7 8 9
CH
SHIFT
0
CLR ENTER
RECEIVER
• The following buttons are not used with this receiver:
-
PTY,
SHIFT
1
SLEEP
11
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
once.
SLEEP
2
RECEIVER
Switches the receiver between standby and on.
12
3
RECEIVER
Switches the remote to control the receiver (used to select the
white commands above the number buttons (MIDNIGHT,
etc)). Also use this button to set up surround sound
or Audio parameters
4
INPUT SELECT
Use to select the input source
13
5
Input function buttons
Use to select the input source to this receiver
will enable you to control other components with the remote
control (page 54).
6
Listening mode buttons
14
– Switches between Auto surround mode
AUTO/DIRECT
(page 33) and Stream Direct playback
ALC/STANDARD SURR
and to switch between the modes of 2 Pro Logic II, 2
15
Pro Logic IIx, 2 Pro Logic IIz and NEO:6, and the Auto
level control stereo mode
– Switches between the various surround
ADV SURR
modes (page 34).
16 7
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
RECEIVER
AUDIO PARAMETER
(page 36).
– Press to access the Home Menu
HOME MENU
(page 46).
– Confirm and exit the current menu screen.
RETURN
(page 46)
(page 36).
(page 25).
(page 25). This
(page 34).
– Press for standard decoding
(page 33).
– Use to access the Audio options
9
Controls and displays
Press BD, or first to access:
DVD DVR/BDR
– Displays the disc 'top' menu of a Blu-ray
TOP MENU
Disc/DVD.
– Displays the HOME MENU screen.
HOME MENU
– Confirm and exit the current menu screen.
RETURN
– Displays the TOOLS menu of Blu-ray Disc player.
MENU
Press first to access:
TUNER
– Memorizes stations for recall
TOOLS
used to change the name (page 32).
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 32).
Press first to access:
iPod/USB
– Switches between the iPod controls and the
iPod CTRL
receiver controls (page 27).
/// (TUNE /, /),
8
PRESET
Use the arrow buttons when setting up your surround sound
system (page 46). Also used to control Blu-ray Disc/DVD
menus/options.
TUNE /
Use can be used to find radio frequencies and
PRESET /
can be used to select preset radio stations
(page 32).
9
Component control buttons
The main buttons (, , etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (BD,
and CD). These buttons also function as described
DVD
below.
Press first to access:
RECEIVER
– Use to adjust Bass or Treble.
BASS +/–, TRE +/–
• These controls are disabled when the listening mode is
set to DIRECT or PURE DIRECT.
• When the front speaker is set at SMALL in the Speaker
Setting (or automatically via the Auto MCACC setup)
and the X.Over is set above 150 Hz, the subwoofer
channel level will be adjusted by pressing
(page 47).
(page 32), also
ENTER
BASS +/–