GMC JIMMY 2002 Manual

page of 489

/ 489
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Table of Contents

Chapters

Table of Contents

Summary of Contents for GMC JIMMY 2002

Page 3 We support voluntary technician certification. GENERAL MOTORS, GM, the GM Emblem, GMC, the GMC Truck Emblem and the name JIMMY are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after For Canadian Owners Who Prefer a that time without further notice.
Page 4: How To Use This Manual
How to Use this Manual CAUTION: Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and These mean there is something that could hurt controls for your vehicle.
Page 5: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols Also, in this book you will find these notices: Your vehicle may be equipped with components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text NOTICE: describing the operation or information relating to a specific component, control, message, gage or indicator.
Page 6 These are some examples of vehicle symbols you may find on your vehicle:...
Page 7: Model Reference
Model Reference This manual covers these models: Door Utility Door Utility...
Page 8: Table Of Contents
Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also learn about some things you should not do with air bags and safety belts. Seats and Seat Controls Rear Safety Belt Comfort Guides for Children Safety Belts: They’re for Everyone...
Page 9: Seats And Seat Controls
Seats and Seat Controls This section tells you about the seats how to adjust them, and fold them up and down. Manual Front Seat CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
Page 10 Manual Lumbar Support (If Equipped) If your vehicle has this feature, there will be a knob on the outboard side of the driver’s bucket seat. Horizontal Control: Raise or lower the front of the seat Turn the knob counterclockwise to increase lumbar by raising or lowering the forward edge of the control.
Page 11 Power Lumbar Control (If Equipped) Memory Seat (If Equipped) If your vehicle has this If your vehicle has this feature, the control located feature, it is located on the on the outboard side of the outboard side of the seat(s). driver’s seat looks like this.
Page 12 3. To program your keyless entry transmitter, if equipped, Heated Front Seats (If Equipped) press the UNLOCK button within five seconds of If your vehicle has this programming the memory button. You will hear a feature, the controls are chime to confirm programming of the transmitter. located on the outboard When your vehicle is in PARK (P) for an automatic side of the seats.
Page 13: Reclining Front Seatbacks
Reclining Front Seatbacks To adjust a manual seatback, lift the lever on the But don’t have a seatback reclined if your vehicle outboard side of the seat. is moving. Release the lever to lock the seatback where you want it. Pull up on the lever and without pushing on the seatback the seat will go to an upright position.
Page 14: Head Restraints
Head Restraints CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.
Page 15: Seatback Latches
Seatback Latches To return the seatback to the upright position, push the seatback all the way back until the latch catches. If the The front seatbacks fold forward to let people get seatback was reclined before being folded forward, it into the back seat or to access the storage area behind will return to the reclined position.
Page 16: Rear Seats
Easy Entry Seat (2-Door Models) Rear Seats The right front seat of your vehicle makes it easy to get Your vehicle has a folding rear seat which lets you fold in and out of the rear seat. the seatbacks down for more cargo space. 1.
Page 17: Safety Belts: They're For Everyone
Safety Belts: They’re for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. And it explains the air bag system. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly.
Page 18 In most states and Canadian provinces, the law says to wear safety belts. Here’s why: They work. CAUTION: You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 19: Why Safety Belts Work
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it’s just a seat on wheels. 1-12...
Page 20 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. doesn’t stop. In a real vehicle, it could be the windshield ... 1-13...
Page 21 or the instrument panel ... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-14...
Page 22: Here Are Questions Many People Ask About
Here Are Questions Many People Ask If I’m a good driver, and I never drive far from home, why should I wear safety belts? About Safety Belts and the Answers You may be an excellent driver, but if you’re in an Won’t I be trapped in the vehicle after an accident even one that isn’t your fault...
Page 23: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly Adults This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see the part of this manual called “Children.”...
Page 24 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 25 What’s wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose. It won’t give nearly as much protection this way.
Page 26 What’s wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 27 What’s wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones.
Page 28 What’s wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.
Page 29: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts. To unlatch the belt, just push the button on the buckle. The belt should go back out of the way.
Page 30: Right Front Passenger Position
The best way to protect the fetus is to protect the Here are the most important things to know about the air mother. When a safety belt is worn properly, it’s more bag system: likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making CAUTION: safety belts effective is wearing them properly.
Page 31 CAUTION: CAUTION: Air bags inflate with great force, faster than the Anyone who is up against, or very close to, any blink of an eye. If you’re too close to an inflating air bag when it inflates can be seriously injured air bag, as you would be if you were leaning or killed.
Page 32 There is an air bag readiness How the Air Bag System Works light on the instrument panel, which shows the air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem.
Page 33 CAUTION: If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air...
Page 34 When should an air bag inflate? What makes an air bag inflate? An air bag is designed to inflate in a moderate to severe In an impact of sufficient severity, the air bag sensing frontal or near frontal crash. The air bag will inflate system detects that the vehicle is in a crash.
Page 35 What will you see after an air bag inflates? Air bags are designed to inflate only once. After they inflate, you’ll need some new parts for your air bag After an air bag inflates, it quickly deflates, so quickly system. If you don’t get them, the air bag system that some people may not even realize the air bag won’t be there to help protect you in another crash.
Page 36 NOTICE: CAUTION: If you damage the covering for the driver’s or the For up to 10 minutes after the ignition key is right front passenger’s air bag, the bag may not turned off and the battery is disconnected, an air work properly.
Page 37 Adding Equipment to Your Air Is there anything I might add to the front of the vehicle that could keep the air bags from Bag-Equipped Vehicle working properly? If I add a push bumper or a bicycle rack to the Yes.
Page 38: Center Front Passenger Position
Center Front Passenger Position Door Models with Front Bench Seat) Lap Belt If your vehicle has a front bench seat, someone can sit in When you sit in the center front seating position, the center position. you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.
Page 39: Rear Seat Passengers
Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash.
Page 40 Shoulder Belt 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if The positions next to the windows have lap shoulder you pull the belt across you very quickly. If this belts.
Page 41 3. To make the lap part tight, pull down on the buckle The lap part of the belt should be worn low and snug on end of the belt as you pull up on the shoulder part. the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
Page 42 The safety belt locks if there’s a sudden stop or a crash. The safety belt also locks if you pull the belt very quickly out of the retractor. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 43: Rear Safety Belt Comfort Guides For Children And Small Adults
Rear Safety Belt Comfort Guides for Children and Small Adults Door Models) Four door models have rear shoulder belt comfort guides. This feature will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head.
Page 44 2. Slide the guide under and past the belt. The elastic 3. Be sure that the belt is not twisted and it lies flat. cord must be under the belt. Then, place the guide The elastic cord must be under the belt and the guide over the belt, and insert the two edges of the belt into on top.
Page 45: Center Rear Passenger Position
Center Rear Passenger Position Door Models) 4. Buckle, position and release the safety belt as described in “Rear Seat Outside Passenger Positions” earlier in this section. Make sure that the shoulder belt crosses the shoulder. To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides.
Page 46: Lap Belt
Lap Belt 4. Position and release it the same way as the lap part of a lap shoulder belt. When you sit in the center rear seating position, you If the belt isn’t long enough, see “Safety Belt have a lap safety belt which has a retractor. Extender”...
Page 47: Children
Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 48 CAUTION: (Continued) CAUTION: For example, in a crash at only 25 mph Children who are up against, or very close to, any (40 km/h), a 12 lb. (5.5 kg) baby will suddenly air bag when it inflates can be seriously injured become a 240 lb.
Page 49 What are the different types of add child restraints? CAUTION: on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Newborn infants need complete support, Selection of a particular restraint should take into including support for the head and neck. This is necessary because a newborn infant’s neck is consideration not only the child’s weight, height weak and its head weighs so much compared with...
Page 50: Restraint Systems For Children
Restraint Systems for Children CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
Page 51 A rear facing infant seat (B) provides restraint with the A forward facing child seat (C E) provides restraint for seating surface against the back of the infant. The the child’s body with the harness and also sometimes harness system holds the infant in place and, in a crash, with surfaces such as T shaped or shelf like shields.
Page 52 How do child restraints work? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built in child restraint system is a permanent part of the motor vehicle. An add child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 53: Where To Put The Restraint
When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it CAUTION: will have a label saying that it meets federal motor vehicle safety standards. A child in a rear facing child restraint can be Then follow the instructions for the restraint.
Page 54: Top Strap
Top Strap Some child restraints have a top strap, or “top tether.” It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap equipped child restraints are designed for use with or without the top strap being anchored.
Page 55 Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say. If your vehicle is equipped with the rear convenience system, there will be plugs covering the anchor brackets. To remove the plugs, grasp the edges of the plugs and pull them out.
Page 56: Securing A Child Restraint In A Rear Outside Seat Position
Securing a Child Restraint in a Rear Outside Seat Position You’ll be using the lap shoulder belt. See the earlier part about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child 3.
Page 57 5. To tighten the belt, feed the shoulder belt back into the 4. Pull the rest of the shoulder belt all the way out of retractor while you push down on the child restraint. If the retractor to set the lock. you’re using a forward facing child restraint, you may find it helpful to use your knee to push down on the...
Page 58 Center Seat Positions (4-Door Models) Securing a Child Restraint in the Right Front Seat Position Don’t use child restraints in these positions. The restraints won’t work properly. 1-51...
Page 59 Your vehicle has a right front passenger air bag. Never You’ll be using the lap shoulder belt. See the earlier part put a rear facing child restraint in this seat. Here’s why: about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint.
Page 60 4. Buckle the belt. Make sure the release button is 5. Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. safety belt quickly if you ever had to. 1-53...
Page 61 6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 7.
Page 62: Older Children
Older Children What is the proper way to wear safety belts? If possible, an older child should wear a shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
Page 63 CAUTION: Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What if a child is wearing a lap shoulder belt, but the child is so small that the shoulder belt is...
Page 64 CAUTION: Never do this. Here a child is sitting in a seat that has a shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.
Page 65: Safety Belt Extender
Safety Belt Extender Checking Your Restraint Systems If the vehicle’s safety belt will fasten around you, you Now and then, make sure the safety belt reminder light should use it. and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other But if a safety belt isn’t long enough to fasten, your loose or damaged safety belt system parts.
Page 66: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts If belts are cut or damaged, replace them. Collision damage also may mean you will need to have safety belt After a Crash or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt wasn’t being used at If you’ve had a crash, do you need new belts? the time of the collision.
Page 67 Section 2 Features and Controls Here you can learn about the many standard and optional features on your vehicle, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.
Page 68: Manual Windows
Windows CAUTION: Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 69 Power Windows (If Equipped) Express Down Window The driver’s window has an express down feature that If you have power windows, the controls are located on allows you to lower it without holding the window the armrests on each of the side doors. The switches switch.
Page 70 Swing-Out Windows (Two-Door Only) Keys If your vehicle has rear swing out windows, CAUTION: unlatch them at the clasps and push out on the glass Leaving children in a vehicle with the ignition to open them. key is dangerous for many reasons. A child or others could be badly injured or even killed.
Page 71 This vehicle has one double sided key for the ignition, endgate, spare tire lock (two door vehicles) and door locks. It will fit with either side up. When a new vehicle is delivered, the dealer provides the owner with a pair of identical keys and a key code number.
Page 72: Door Locks
The key code number tells your dealer or a qualified Door Locks locksmith how to make extra keys. Keep this number in a safe place. If you lose your keys, you’ll be able to have new ones made easily using this number. Your selling CAUTION: dealer should also have this number.
Page 73 There are several ways to lock and unlock your vehicle: Power Door Locks (If Equipped) You can use the keyless entry system, if your vehicle has this feature. You can use your key to unlock your door from the outside. You can use the power lock switch (if equipped) to lock or unlock the doors.
Page 74: Programmable Automatic Door Locks
Programmable Automatic Door Locks No doors lock/None of the doors unlock: Press the lock side of the power lock switch on the door panel (If Equipped) twice. This turns off the automatic lock feature. If your vehicle has power door locks, it will be equipped For more information, see your dealer.
Page 75 To enter the program mode you need to do the Rear Door Security Lock (If Equipped) following: With this feature, you can lock the rear doors so they may not be opened from the inside by passengers. 1. Begin with the ignition in OFF. Then pull the turn signal/multifunction lever all the way toward you The security lock lever is and hold it while you perform the next step.
Page 76: Leaving Your Vehicle
Lockout Prevention Keyless Entry System (If Equipped) This feature stops the power door locks from locking If your vehicle has this feature, you can lock and unlock when the keys are in the ignition and a door is open, to your doors from about 3 feet (1 m) up to 30 feet (9 m) protect you from locking your key in the vehicle.
Page 77 Changes or modifications to this system by other than an Operation authorized service facility could void authorization to use this equipment. UNLOCK: When you press UNLOCK, the At times you may notice a decrease in range. This is driver’s door will normal for any remote keyless entry system.
Page 78: Battery Replacement
Panic Alarm Button Battery Replacement When the panic button with the horn symbol on the key Under normal use, the battery in your remote keyless transmitter is pressed, the horn will sound and the entry transmitter should last about two years. headlamps and taillamps will flash for up to 30 seconds.
Page 79: Rear Window
To replace the battery in the keyless entry transmitter do Rear Window the following: CAUTION: It can be dangerous to drive with the rear window or endgate open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death.
Page 80 Endgate Release When the doors are unlocked, press the button To open a manual lock system from the outside, insert to open the glass. the key into the lock and turn it counterclockwise to unlock the glass. To open a power lock system from the outside, insert the key into the lock button and turn it counterclockwise.
Page 81 Reach inside the endgate Remote Rear Glass Release to lift the handle and open The REAR HATCH button, the endgate. located to the right of the steering wheel on the instrument panel, allows you to release the rear glass from inside the vehicle. The endgate can be opened without a key if the driver’s If your vehicle has an automatic transmission, your shift door is unlocked.
Page 82 Emergency Release for Opening Endgate Endgate-Mounted Spare (If Equipped) 1. Peel back or slit the carpet locally to expose the If your vehicle has an endgate mounted spare tire access hole in the trim panel. carrier, you must move the carrier arm out of the way to open the glass.
Page 83 Theft Parking at Night Park in a lighted spot, close all windows and lock your Vehicle theft is big business, especially in some cities. vehicle. Remember to keep your valuables out of sight. Although your vehicle has a number of theft deterrent Put them in a storage area, or take them with you.
Page 84 Content Theft Deterrent If a door is opened without the key or the remote keyless entry transmitter, the alarm will go off. Your vehicle’s (If Equipped) headlamps will flash and the horn will sound for 110 seconds, then will turn off to save the battery power. Your vehicle may be equipped with a Content Theft Deterrent alarm system.
Page 85: Testing The Alarm
Testing the Alarm Passlock The alarm can be tested by following these steps: Your vehicle is equipped with the Passlock theft deterrent system. 1. From inside the vehicle, lower the driver’s window and open the driver’s door. Passlock is a passive theft deterrent system.
Page 86: Ignition Positions
New Vehicle “Break In” Ignition Positions With the key in the ignition, you can turn it to five different positions. NOTICE: Your vehicle doesn’t need an elaborate “break in.” But it will perform better in the long run if you follow these guidelines: Keep your speed at 55 mph (88 km/h) or less for the first 500 miles (805 km).
Page 87 B (LOCK): This position locks your ignition, steering NOTICE: wheel and transmission. It’s a theft deterrent feature. You will only be able to remove your key when the ignition is turned to LOCK. Don’t operate accessories in the ACCESSORY position for long periods of time. Prolonged operation of accessories in the ACCESSORY NOTICE: position could drain your battery and prevent...
Page 88 Key Release Button Retained Accessory Power (RAP) Your vehicle is equipped with a Retained Accessory The key cannot be removed Power (RAP) feature which will allow certain features from the ignition of manual of your vehicle to continue to work for up to 20 minutes transmission vehicles unless after the ignition key is turned to OFF.
Page 89: Starting Your Engine
Starting Your Engine Starting Your V6 Engine 1. With your foot off the accelerator pedal, turn the Automatic Transmission ignition key to START. When the engine starts, let Move your shift lever to PARK (P) or NEUTRAL (N). go of the key. The idle speed will go down as your that’s a Your engine won’t start in any other position engine gets warm.
Page 90 When starting your engine in very cold weather (below 0 _ F or 18 _ C), do this: NOTICE: 1. With your foot off the accelerator pedal, turn the Your engine is designed to work with the ignition key to START and hold it there up to 15 seconds.
Page 91: To Use The Engine Coolant Heater
Engine Coolant Heater (If Equipped) CAUTION: In very cold weather, 0 _ F ( 18 _ C) or colder, the engine coolant heater can help. You’ll get easier starting and better fuel economy during engine warm up. Usually, Plugging the cord into an ungrounded outlet the coolant heater should be plugged in a minimum of could cause an electrical shock.
Page 92: Automatic Transmission Operation
Automatic Transmission Operation If your vehicle is equipped with a column shift lever, it features an electronic shift position indicator within the instrument panel cluster. This display must be powered anytime the shift lever is capable of being moved out of PARK (P).
Page 93 PARK (P): This position locks your rear wheels. It’s the CAUTION: (Continued) best position to use when you start your engine because your vehicle can’t move easily. So, be sure the transfer case is in a drive gear not in NEUTRAL. See “Four Wheel CAUTION: Drive (Automatic Transfer Case)”...
Page 94 REVERSE (R): Use this gear to back up. CAUTION: NOTICE: Shifting out of PARK (P) or NEUTRAL (N) while your engine is “racing” (running at high speed) is Shifting to REVERSE (R) while your vehicle is dangerous. Unless your foot is firmly on the moving forward could damage your brake pedal, your vehicle could move very transmission.
Page 95 DRIVE (D): This position is for normal driving. If you FIRST (1): This position gives you even more power need more power for passing, and you’re: but lower fuel economy than SECOND (2). You can use it on very steep hills, or in deep snow or mud. If the shift Going less than about 35 mph (55 km/h), push your lever is put in FIRST (1) while the vehicle is moving accelerator pedal about halfway down.
Page 96: Manual Transmission Operation
Tow/Haul Selector Button (If Equipped) Manual Transmission Operation Your vehicle may be 5-Speed equipped with a tow/haul This is your shift pattern. selector button. This button will be located on the floor console. If your vehicle is equipped with the tow/haul selector button, you can use this feature to more effectively tow Here’s how to operate your manual transmission: or haul a heavy load.
Page 97 SECOND (2): Press the clutch pedal as you let up on REVERSE (R): To back up, press the clutch pedal, wait the accelerator pedal and shift into SECOND (2). Then, about six seconds, then shift into REVERSE (R). Then slowly let up on the clutch pedal as you press the let up on the clutch pedal slowly while pressing the accelerator pedal.
Page 98 Shift Light (If Equipped) While you accelerate, it is normal for the light to go on and off if you quickly change the position of the If you have a manual accelerator. Ignore the SHIFT light when you downshift. transmission, you have a SHIFT light on your instrument panel cluster.
Page 99 Four Wheel Drive (If Equipped) Electronic Transfer Case (If Equipped) If your vehicle has four wheel drive, you can send your If your four wheel drive engine’s driving power to all four wheels for extra vehicle has the electronic traction. To get the most satisfaction out of four wheel transfer case, the transfer drive, you must be familiar with its operation.
Page 100 4LO: This setting also engages your front axle to give Shifting from 2HI or 4HI to 4LO you extra traction. You may never need 4LO. It sends To shift from 2HI or 4HI to 4LO, the vehicle must be the maximum power to all four wheels. You might stopped or moving less than 3 mph (4.8 km/h) with the choose 4LO if you were driving off road in sand, mud...
Page 101 Shifting from 4LO to 4HI or 2HI On automatic transmission equipped vehicles, if your transfer case does not shift into 4HI, your transmission To shift from 4LO to 4HI or 2HI, your vehicle must be indicator switch may require adjustment. With your stopped or moving less than 3 mph (4.8 km/h) with the transmission in NEUTRAL (N), press and release the transmission in NEUTRAL (N) or the clutch pedal...
Page 102 Automatic Transfer Case (If Equipped) If your vehicle is equipped with the automatic transfer case, the transfer case buttons are located to the right of the steering wheel on the instrument panel. 2HI: This setting is used for driving in most street and Use these buttons to shift into and out of four wheel highway situations.
Page 103 4HI: Use 4HI when you need extra traction, such as NEUTRAL: Shift the vehicle’s transfer case to on snowy or icy roads or in most off road situations. NEUTRAL only when towing your vehicle. See This setting also engages your front axle to help drive “Recreational Vehicle Towing”...
Page 104 Shifting to 2HI Shifting Out of 4LO Press and release the 2HI button. This can be done at To shift from 4LO to 4HI, AUTO 4WD or 2HI, your any speed. vehicle must be stopped or moving less than 3 mph (4.8 km/h) with the transmission in NEUTRAL (N), or Shifting to 4LO with the clutch pedal pressed for vehicles with manual...
Page 105 Shifting to NEUTRAL Shifting Out of NEUTRAL To shift the transfer case to NEUTRAL, first make sure To shift out of NEUTRAL: the vehicle is parked so that it will not roll: 1. Set the parking brake and apply the regular 1.
Page 106: Parking Brake
Parking Brake The parking brake is located near the bottom of the instrument panel on the driver’s side of the vehicle. To set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brake pedal with your left foot.
Page 107: Column Shift Lever
Shifting Into PARK (P) Column Shift Lever (Automatic Transmission Only) 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into PARK (P) like this: CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.
Page 108: Console Shift Lever
Console Shift Lever 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into PARK (P) position like this: Move the lever up as far as it will go. 3. Turn the ignition key to LOCK. 4.
Page 109 Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) and your Running (Automatic Transmission Only) parking brake is firmly set before you leave it. After you’ve moved the shift lever into PARK (P), hold the regular brake pedal down.
Page 110: Parking Your Vehicle (Manual Transmission Models Only
Shifting Out of PARK (P) Parking Your Vehicle (Manual (Automatic Transmission Only) Transmission Models Only) Your vehicle has an automatic transmission shift lock Before you get out of your vehicle, move the shift lever control system. You have to fully apply the regular into REVERSE (R), and firmly apply the parking brake.
Page 111: Parking Over Things That Burn
Parking Over Things That Burn Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: Your exhaust system sounds strange or different.
Page 112 Running Your Engine While You’re CAUTION: Parked (Automatic Transmission) It’s better not to park with the engine running. But if you It can be dangerous to get out of your vehicle if ever have to, here are some things to know. the shift lever is not fully in PARK (P) with the parking brake firmly set.
Page 113: Locking Rear Axle
Locking Rear Axle Tilt Wheel (If Equipped) If your vehicle has this feature, your locking rear axle A tilt wheel allows you to adjust the steering wheel can give you additional traction on snow, mud, ice, sand before you drive. If you have the tilt steering wheel, you or gravel.
Page 114 Turn Signal/Multifunction Lever Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically.
Page 115: Headlamp High/Low-Beam Changer
If a bulb is burned out, replace it to help avoid an When the high beams are accident. If the arrows don’t go on at all when you on, this indicator light on signal a turn, check the fuse (see “Fuses and Circuit the instrument panel cluster Breakers”...
Page 116: Windshield Wipers
Windshield Wipers OFF: Turn the band to OFF to turn off the windshield wipers. LO (Low Speed): Turn the band away from you to LO and past the delay settings for steady wiping at low speed. HI (High Speed): Turn the band away from you, to HI, and past the delay settings for wiping steady at high speed.
Page 117: Windshield Washer
Windshield Washer Rear Window Washer/Wiper There is a paddle marked with the windshield washer This control is located on symbol at the top of the multifunction lever. To spray the instrument panel to the washer fluid on the windshield, push the paddle. The right of the steering wheel.
Page 118 Cruise Control (If Equipped) CAUTION: With cruise control, you can maintain a speed of about Cruise control can be dangerous where you 25 mph (40 km/h) or more can’t drive safely at a steady speed. So, without keeping your foot on the accelerator.
Page 119 Setting Cruise Control Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, shuts off CAUTION: the cruise control. But you don’t need to reset it. Once you’re going about 25 mph (40 km/h) or more, If you leave your cruise control switch on when you can move the cruise control switch briefly from ON you’re not using cruise, you might hit a button...
Page 120 Increasing Speed While Using Cruise Control Using Cruise Control on Hills There are two ways to go to a higher speed: How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. Use the accelerator pedal to get to the higher speed.
Page 121: Exterior Lamps
Exterior Lamps The exterior lamps control has three positions: (Parking Lamps): Turning the exterior lamps control to this position turns on the parking lamps together with the following: Parking Lamps Sidemarker Lamps Taillamps License Plate Lamps Instrument Panel Lights (Headlamps): Turning the exterior lamps control to this position turns on the headlamps, together with the previously listed lamps and lights.
Page 122: Automatic Headlamp System
Automatic Headlamp System To idle your vehicle with the automatic headlamp system off, set the parking brake while the ignition is When it is dark enough outside, your automatic off. Then start your vehicle. The automatic headlamp headlamp system will turn on your headlamps at the system will stay off until you release the parking brake.
Page 123: Daytime Running Lamps
Daytime Running Lamps The DRL system on some vehicles may turn off temporarily while the turn signals are activated. Daytime Running Lamps (DRL) can make it easier for To idle an automatic transmission vehicle with the DRL others to see the front of your vehicle during the day. off, put the transmission in PARK (P).
Page 124: Interior Lamps
Fog Lamps (If Equipped) Interior Lamps Use your fog lamps for better vision in foggy or misty Instrument Panel Brightness Thumbwheel conditions. Your parking lamps must be on for your fog This feature controls the brightness of the instrument lamps to work. panel lights.
Page 125: Exit Lighting
Exit Lighting Dome Lamps With exit lighting, the interior lamps will come on when The dome lamps will come on when you open a door. you remove the key from the ignition to help you see You can also turn the dome lamps on by turning the while exiting the vehicle.
Page 126 Battery Run-Down Protection Mirrors This feature shuts off the dome, courtesy, vanity, Inside Day/Night Rearview Mirror reading, glove box and underhood lamps if they are left on for more than 20 minutes when the ignition is off. This will keep your battery from running down. If the battery run down protection shuts off the interior lamps, it may be necessary to do one of the following to...
Page 127 Electrochromic Day/Night Inside Rearview Mirror (If Equipped) This mirror automatically changes to reduce glare from headlamps behind you. A photocell on the back of the mirror senses when it is becoming dark outside. Another photocell built into the mirror surface senses when headlamps are behind you.
Page 128 Time Delay Power Remote Control Rearview Mirrors (If Equipped) The automatic mirror has a time delay feature which prevents unnecessary switching from the night back to These controls are located the day position. This delay prevents rapid changing of on the driver’s door armrest. the mirror as you drive under lights and through traffic.
Page 129: Storage Compartments
Convex Outside Mirror Electrochromic Outside Rearview Mirror (If Equipped) A convex mirror’s surface is curved so you can see more from the driver’s seat. If your vehicle has this feature, the driver’s side outside mirror will adjust for the glare of headlamps behind you. See “Electrochromic Day/Night Inside Rearview CAUTION: Mirror”...
Page 130 Overhead Console (If Equipped) Reading Lamps Press the button near each lamp to turn the reading lamps on and off. The overhead console includes reading lamps, a compartment for a garage door opener, a temperature The lamps can also be swiveled to point in the desired and compass display and a storage compartment for direction.
Page 131 Installing a Garage Door Opener Press it firmly to the back of your garage door opener, as close to the center of the opener as possible. If you have a garage door opener, the front overhead compartment can be used to conveniently store Center the garage door opener activation button over the opener.
Page 132 Now, with the compartment Temperature and Compass Display door closed, press the button again to make sure the garage door opener operates properly. With the garage door opener positioned properly and the right number of pegs in place, you should only have to press the button slightly to operate the opener.
Page 133 Turn the display on or off by pressing the ON/OFF button. Display the temperature in either degrees Fahrenheit (English) or Celsius (metric) by pressing the US/MET button. Before you turn on the ignition and move the vehicle, the temperature indicated will be the last outside temperature recorded with the ignition on.
Page 134: Door Storage
Sunglasses Storage Compartment Front Storage Area (If Equipped) The console has a sunglasses storage compartment. To If your vehicle has this console compartment, squeeze open the compartment press the release button. Then the front lever while lifting the top to open it. You can pull the compartment down.
Page 135 The console also contains the following components: Convenience Net (If Equipped) Rear Seat Audio Controls Rear Seat Accessory Power Outlets disc CD Changer Cellular Phone (if equipped) For more information on these components, please see the Index for that item. You may have a convenience net in the rear of your vehicle to help keep small items, like gloves and light clothing, in place during sharp turns or quick stops and starts.
Page 136 Cargo Cover (If Equipped) Cargo Tie Downs If your vehicle has a cargo cover, you can use it to cover There are five cargo tie items in the cargo area of your vehicle. downs in the rear of your vehicle that allow you to Grasp the handle and unroll the cover.
Page 137 Rear Convenience System (If Equipped) CAUTION: If the convenience system isn’t secured properly, it can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to secure the convenience system properly. The convenience system, located in the rear of your vehicle, provides a place to store loose items in your vehicle.
Page 138 To increase the space in the convenience system, do the There are two cutouts (E) for the rear cargo tie downs following: located near the endgate sill. In order to access the rear cargo tie downs, the cutouts must be removed. 1.
Page 139 Luggage Carrier (Option) Use GM accessory racks that are compatible with your luggage carrier for transporting sports equipment. These are available through your dealer. CAUTION: You can adjust the crossrails to handle loads of various sizes. Just loosen the slider knobs at each end of the crossrail and move them to where you want them.
Page 140 Ashtrays and Cigarette Lighter NOTICE: Pull the front ashtray door down to open it. Loading cargo that weighs more than 200 lbs. NOTICE: (91 kg) on the luggage carrier may damage your vehicle. When you carry large things, never let them hang over the rear or the sides of your Don’t put papers and other things that burn into vehicle.
Page 141: Sun Visors
Sun Visors Accessory Power Outlets To block out glare, you can pull the visor down. You can With accessory power outlets you can plug in auxiliary also swing the visor from side side. electrical equipment such as a cellular telephone or CB radio.
Page 142 Certain electrical accessories may not be compatible When adding electrical equipment, be sure to follow the with the accessory power outlet and could result in proper installation instructions included with the blown vehicle or adapter fuses. If you experience a equipment.
Page 143 Sunroof (If Equipped) Press and release the rear side of the switch in the mini console to open the sunroof. You can press the forward Your vehicle may be equipped with a power sliding side of the switch to close the sunroof. Once the sunroof sunroof.
Page 144: Homelink Transmitter
HomeLink Transmitter (If Equipped) Full Size Overhead Console This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 145: Programming The Homelink Transmitter
Programming the HomeLink Transmitter 3. When the HomeLink indicator light begins to blink slowly (this may take up to 30 seconds), hold the Do not use the HomeLink Transmitter with any garage hand held transmitter about 1 to 3 inches (3 to 8 cm) door opener that does not have the “stop and reverse”...
Page 146 Training a Garage Door Opener with 3. Press the “Learn” or “Smart” button on the garage door opener motor head unit. An indicator light will Rolling Codes (If Equipped) begin to flash when the motor head unit enters the If you have not previously programmed the hand held training mode.
Page 147: Canadian Programming
Canadian Programming Erasing Channels Canadian Owners: During programming, the To erase all three programmed channels, hold down the hand held transmitter may automatically stop two outside buttons until the indicator light begins to transmitting after two seconds. In this case, you should flash (approximately 20 seconds).
Page 148 The Instrument Panel Your Information System 2-82...
Page 149 The main components of your instrument panel are the following: A. Air Vents I. Rear Window Washer/Wiper B. Turn Signal/Multifunction Lever J. Rear Endgate Release C. Instrument Panel Cluster K. Ashtray D. Transfer Case Button (If Equipped) L. Comfort Controls E.
Page 150: Instrument Panel Cluster
Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel you’ve used, and many other things you’ll need to know to drive safely and economically.
Page 151 Uplevel cluster with Automatic Transmission United States, Canada cluster similar 2-85...
Page 152: Speedometer And Odometer
Speedometer and Odometer Tachometer (If Equipped) Your speedometer lets you see your speed in both miles The tachometer displays the engine speed in revolutions per hour (mph) and kilometers per hour (km/h). per minute (rpm). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or NOTICE: kilometers (used in Canada).
Page 153: Safety Belt Reminder Light
Warning Lights, Gages and When one of the warning lights comes on and stays on when you are driving, or when one of the gages shows Indicators there may be a problem, check the section that tells you what to do about it. Please follow this manual’s advice. This part describes the warning lights and gages that Waiting to do repairs can be costly and even...
Page 154: Air Bag Readiness Light
Air Bag Readiness Light CAUTION: There is an air bag readiness light on the instrument panel, which shows the air bag symbol. The system checks the air bag’s electrical system for malfunctions. If the air bag readiness light stays on after you The light tells you if there is an electrical problem.
Page 155: Voltmeter Gage
Charging System Indicator Light Voltmeter Gage The charging system light When your engine is not will come on briefly when running, but the ignition is you turn on the ignition, on (in RUN), this gage but the engine is not shows your battery’s state of running, as a check to charge in DC volts.
Page 156: Brake System Warning Light
You can only drive for a short time with the reading in Brake System Warning Light either warning zone. If you must drive, turn off all When the ignition is on, the brake system warning light unnecessary accessories. will come on when you set your parking brake. The light Readings in either warning zone indicate a possible will stay on if your parking brake doesn’t release fully.
Page 157: Anti-Lock Brake System Warning Light
This light should come on briefly when you turn the Anti-Lock Brake System Warning Light ignition key to RUN. If it doesn’t come on then, With the anti lock brake have it fixed so it will be ready to warn you if there’s system, this light will come a problem.
Page 158: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Malfunction Indicator Lamp (Service Engine Soon Light in the United States or Check Engine Light in Canada) United States Canada United States Canada Your vehicle is equipped with a computer which monitors operation of the fuel, ignition and emission This gage shows the engine coolant temperature.
Page 159 This light should come on, as a check to show you it is NOTICE: working, when the ignition is on and the engine is not running. If the light doesn’t come on, have it repaired. This light will also come on during a malfunction in one If you keep driving your vehicle with this light of two ways: on, after a while, your emission controls may not...
Page 160 If the Light Is Flashing If the Light Is On Steady The following may prevent more serious damage to You may be able to correct the emission system your vehicle: malfunction by considering the following: Reducing vehicle speed. Did you recently put fuel into your vehicle? Avoiding hard accelerations.
Page 161 Have you recently changed brands of fuel? Emissions Inspection and Maintenance Programs If so, be sure to fuel your vehicle with quality fuel. See Some state/provincial and local governments have or “Fuel” in the Index. Poor fuel quality will cause your may begin programs to inspect the emission control engine not to run as efficiently as designed.
Page 162: Oil Pressure Gage
Oil Pressure Gage CAUTION: Don’t keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches fire. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced.
Page 163: Security Light
Security Light Service Four-Wheel-Drive Warning Light (If Equipped) This light will come on briefly when you turn the This light should come on key toward START. The briefly when you turn on the light will stay on until the ignition, as a check to show engine starts.
Page 164: Gate Ajar Light
Tow/Haul Mode Light (If Equipped) Check Gages Light This light should come on The CHECK GAGES light when the tow/haul mode has will come on briefly when been selected. you are starting the engine. For more information, see “Tow/Haul Mode” in If the light comes on and stays on while you are driving, the Index.
Page 165: Fuel Gage
Fuel Gage Here are four things that some owners ask about. None of these show a problem with your fuel gage: At the gas station, the gas pump shuts off before the gage reads full. It takes a little more or less fuel to fill up than the gage indicated.
Page 166 Low Fuel Light COMP/TEMP(Compass/Temperature): The display provides the outside temperature and one of eight The LOW FUEL light will compass readings to indicate the direction the vehicle come on briefly when you is facing. are starting the engine. Before you turn on the ignition and move the vehicle, the temperature indicated will be the last outside temperature recorded with the ignition on.
Page 167 Variance is the difference between magnetic north and TRIP: Once in the TRIP mode, pressing the geographic north. In some areas, the difference between MODE button will step you through the following the two can be great enough to cause false compass TRIP functions: readings.
Page 168 NOTES 2-102...
Page 169 Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your vehicle. Be sure to read about the particular systems supplied with your vehicle. Comfort Controls FM Stereo with Compact Disc Player Standard Climate Control System with Radio Data System (RDS) and Automatic...
Page 170: Comfort Controls
Comfort Controls Temperature Knob The middle knob on the control panel lets you select the With this system, you can control the heating, cooling relative temperature of the air flowing into the passenger and ventilation in your vehicle. area of your vehicle. Move the knob clockwise toward Standard Climate Control System the red area for warmer air.
Page 171: Air Conditioning
A/C (Air Conditioning): This setting cools and Air Conditioning dehumidifies the air entering your vehicle and directs On hot days, open the windows long enough to let hot most of the air through the instrument panel vents inside air escape. This reduces the time it takes for your and a small amount through the floor ducts.
Page 172: Defogging And Defrosting
Heating Rear Window Defogger (If Equipped) The heater works best if you keep your windows closed If your vehicle has this while using it. On cold days, use floor mode with the feature, the rear window temperature knob turned clockwise. Blend mode is will have lines that warm useful in cool weather when you have fog or ice on the the glass.
Page 173: Ventilation System
The rear window defogger will stay on for five to seven minutes, then turn off. If you need additional warming time, turn it on again. You can turn the defogger off at any time by pressing the button. Do not attach a temporary vehicle license, tape or decals across the defogger grid on the rear window.
Page 174: Audio Systems
Ventilation Tips Audio Systems Keep the hood and front air inlet free of ice, snow or Your audio system has been designed to operate easily any other obstruction (such as leaves). The heater and give years of listening pleasure. You will get the and defroster will work far better, reducing the most enjoyment out of it if you acquaint yourself with it chance of fogging the inside of your windows.
Page 175 Setting the Clock for Systems with Radio AM-FM Stereo Data System Your radio may have a button marked with an H or HR to represent hours and an M, MN or MIN to represent minutes. Press and hold the hour button until the correct hour appears.
Page 176 Finding a Station 3. Tune in the desired station. FM: Press this knob to switch between AM, FM1 4. Press SET. SET will appear on the display. and FM2. The display shows your selection. 5. Press one of the four pushbuttons within five TUNE: Turn this knob to tune in radio stations.
Page 177 Setting the Tone (Bass/Treble) AM-FM Stereo BASS: Slide this lever up or down to increase or decrease bass. TREB (Treble): Slide this lever up or down to increase or decrease treble. If a station is weak or noisy, you may want to decrease the treble.
Page 178 Finding a Station Setting Preset Stations AM FM: Press this button to switch between AM, FM1 The six numbered pushbuttons let you return to and FM2. The display shows your selection. your favorite stations. You can set up to 18 stations (six AM, six FM1 and six FM2) by performing the TUNE: Turn this knob to tune in radio stations.
Page 179 To adjust the treble, press and release AUDIO until TRE Adjusting the Speakers (Balance/Fade) appears on the display. Then press and hold the up arrow AUDIO: To adjust the balance between the right and to increase treble. T and a positive number will appear left speakers, press and release AUDIO until BAL on the display.
Page 180 To adjust balance or fade to the middle position, select AM-FM Stereo with Cassette Tape Player BAL or FAD. Then press and hold AUDIO for more (If Equipped) than two seconds until you hear a beep. L and a zero or F and a zero will appear on the display.
Page 181 Finding a Station 4. Press SET. SET will appear on the display. FM: Press this knob to switch between AM, FM1 5. Press one of the four pushbuttons within and FM2. five seconds. Whenever you press that numbered pushbutton, the station you set will return. TUNE: Turn this knob to tune in radio stations.
Page 182 Setting the Tone (Bass/Treble) Once the tape is playing, use the VOLUME, BAL, FADE, BASS and TREB controls just as you do BASS: Slide this lever up or down to increase or for the radio. decrease bass. If an error appears on the display, see “Cassette Tape TREB (Treble): Slide this lever up or down to increase Messages”...
Page 183 CD Adapter Kits AM-FM Stereo with Cassette Tape Player and Automatic Tone Control (If Equipped) It is possible to use a portable CD player adapter kit with your cassette tape player after activating the bypass feature on your tape player. To activate the bypass feature, use the following steps: 1.
Page 184 RECALL: Pressing this button will display the station SEEK : Press the right or left arrow to seek to the being played or it will display the clock. Clock display next or previous station and stay there. The radio will is available with the ignition turned off.
Page 185 Setting Preset Stations Setting the Tone (Bass/Treble) The six numbered pushbuttons let you return to BASS: Press this knob lightly so it extends. Turn the your favorite stations. You can set up to 18 stations knob clockwise to increase bass and counterclockwise to (six AM, six FM1 and six FM2) by performing the decrease bass.
Page 186 Adjusting the Speakers (Balance/Fade) Once the tape is playing, use the VOL, AUTO TONE, BAL, FADE, BASS and TREB controls just as you do BAL (Balance): Press this knob lightly so it extends. for the radio. The tape symbol and a direction arrow will Turn the knob clockwise to adjust sound to the right be on the display whenever a tape is being played.
Page 187 REV 4 (Reverse): Press this pushbutton to rapidly AM FM: Press this button to listen to the radio when reverse the tape. Press this pushbutton again to stop playing a tape. reversing the tape. The radio will play the last selected TAPE AUX (Auxiliary): Press this button to play a station while reversing the tape.
Page 188 CD Adapter Kits AM-FM Stereo with Cassette Tape Player (Bose ) (If Equipped) It is possible to use a portable CD player adapter kit with your cassette tape player after activating the bypass feature on your tape player. To activate the bypass feature, use the following steps: 1.
Page 189 MUTE: Press this button to silence the system. Press it SEEK : Press the right or left arrow to seek to the again to turn on the sound. next or previous station and stay there. The sound will mute while seeking. RECALL: Press this button to display the station being played or to display the clock.
Page 190 Setting Preset Stations Adjusting the Speakers (Balance/Fade) The six numbered pushbuttons let you return to BAL (Balance): Press this knob lightly so it extends. your favorite stations. You can set up to 18 stations Turn the knob clockwise to adjust sound to the right (six AM, six FM1 and six FM2) by performing the speakers and counterclockwise to adjust sound to the left following steps:...
Page 191 The tape symbol and a direction arrow will be on the 5 (Dolby): Press this pushbutton to reduce cassette display whenever a tape is being played. Any time a tape noise. The double D symbol will appear on the tape is inserted, the top side is selected for play first. display while the player is in this mode.
Page 192 Cassette Tape Messages AM-FM Stereo with Compact Disc Player and Automatic Tone Control (If Equipped) CLN (Clean): If this message appears on the display, the cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to the tapes and player.
Page 193 SCV (Speed Compensated Volume): With SCV, your SEEK : Press the right or left arrow to seek to the audio system adjusts automatically to make up for road next station or previous station and stay there. The radio and wind noise as you drive. Set the volume at the will seek to stations with a strong signal only.
Page 194 Setting Preset Stations Setting the Tone (Bass/Treble) The six numbered pushbuttons let you return to BASS: Press this knob lightly so it extends. Turn the your favorite stations. You can set up to 18 stations knob clockwise to increase bass and counterclockwise to (six AM, six FM1 and six FM2) by performing the decrease bass.
Page 195 Adjusting the Speakers (Balance/Fade) 2 RDM (Random): Press this pushbutton to play the tracks on the disc in random order. RANDOM will BAL (Balance): Press this knob lightly so it extends. appear on the display. Press this pushbutton again to Turn the knob clockwise to adjust sound to the right return to normal play.
Page 196 RECALL: Press this button to see what track is playing. Compact Disc Messages Press it again within five seconds to see how long the ERR (Error): If this message appears and the disc CD has been playing that track. Elapsed time is comes out, it could be for one of the following reasons: displayed in minutes and seconds.
Page 197 AM-FM Stereo with Compact Disc Player Playing the Radio with Radio Data System (RDS) and PWR (Power): Press this knob to turn the system on Automatic Tone Control (If Equipped) and off. VOL (Volume): Turn the knob clockwise to increase volume.
Page 198 Finding a Station Setting Preset Stations AM FM: Press this button to switch between AM, FM1 The six numbered pushbuttons let you return to and FM2. The display shows your selection. your favorite stations. You can set up to 18 stations (six AM, six FM1 and six FM2) by performing the TUNE: Turn this knob to choose radio stations.
Page 199 Setting the Tone (Bass/Treble) AUTO TONE: This feature allows you to choose preset bass and treble equalization settings designed AUDIO: Push and release the AUDIO knob until BASS for country/western, jazz, talk, pop, rock and or TREB appears on the display. Turn the knob clockwise classical stations.
Page 200 To adjust the balance and fade to the middle position, RDS features are only available on FM stations which push the AUDIO knob, then push it again and hold it broadcast RDS information. The RDS features of your until you hear one beep. The balance and fade will be radio rely on receiving specific RDS information from adjusted to the middle position and the display will these stations.
Page 201 DISP (Display): Press this knob to change what appears AM FM (Alternate Frequency): Alternate frequency on the display while using RDS. Pressing this knob will allows the radio to switch to a stronger station with the also display an RDS station frequency or program type same program type.
Page 202 RDS Messages message at your own speed, press the INFO button again for less than one second. A new group of words will ALERT!: Alert warns of national or local emergencies. appear on the display. Once the complete message has You will not be able to turn off alert announcements.
Page 203 When a traffic announcement comes on the current radio Playing a Compact Disc station, you will hear it, even if the volume is muted or a Insert a disc partway into the slot, label side up. The compact disc is playing. The traffic symbol and player will pull it in and the disc should begin playing.
Page 204 2 NEXT: Press this pushbutton to go to the next track. SEEK : Press the left arrow to go to the start of TRACK and the track number will appear on the the current or previous track. Press the right arrow to go display.
Page 205: Am-Fm Stereo With Compact Disc Player
Compact Disc Messages AM-FM Stereo with Compact Disc Player (Bose R ) (If Equipped) If the disc comes out, it could be for one of the following reasons: If you’re driving on a very rough road. When the road becomes smooth the disc should play. If it’s very hot.
Page 206 Playing the Radio Finding a Station AM FM: Press this button to switch between AM, FM1 PWR (Power): Press this knob to turn the system on and FM2. The display will show your selection. and off. TUNE: Press this knob lightly so it extends. Turn it to VOL (Volume): Turn this knob clockwise to increase choose radio stations.
Page 207 Setting Preset Stations Adjusting the Speakers (Balance/Fade) The six numbered pushbuttons let you return to BAL (Balance): Press this knob lightly so it extends. your favorite stations. You can set up to 18 stations Turn the knob clockwise to adjust sound to the right (six AM, six FM1 and six FM2) by performing the speakers and counterclockwise to adjust sound to the left following steps:...
Page 208 2 RDM (Random): Press this pushbutton to play the RECALL: Press this button to see what track is playing. tracks on the disc in random order. RANDOM will Press it again within five seconds to see how long the appear on the display. Press this pushbutton again to CD has been playing that track.
Page 209 Compact Disc Messages AM-FM Stereo with Cassette Tape and Compact Disc Player with Radio Data ERR (Error): If the disc comes back out and this System (RDS) and Automatic Tone Control message appears on the display, it could be for one of the following reasons: (If Equipped) You are driving on a very rough road.
Page 210 Playing the Radio Finding a Station PWR (Power): Press this knob to turn the system on AM FM: Press this button to switch between AM, FM1 and off. and FM2. The display will show your selection. " VOL (Volume): Turn this knob clockwise to increase TUNE : Turn this knob to choose radio stations.
Page 211 Setting Preset Stations Setting the Tone (Bass/Treble) The six numbered pushbuttons let you return to AUDIO: Press and release the AUDIO knob until your favorite stations. You can set up to 18 stations BASS or TREB appears on the display. Turn the knob (six AM, six FM1 and six FM2) by performing the clockwise or counterclockwise to increase or decrease.
Page 212 Adjusting the Speakers (Balance/Fade) Using RDS Your audio system is equipped with a Radio Data System AUDIO: To adjust the balance to the right and left (RDS). RDS is a system that receives data along with the speakers, push and release the AUDIO knob until BAL audio of the FM station you are currently tuned to.
Page 213 Finding RDS Stations Finding a PTY Preset Station To find RDS stations perform the following steps: TYPE LIST (Program Type): Turn this knob clockwise or counterclockwise to select the Program 1. Push the SEEK TYPE button or turn the P TYPE Type (PTY) you want to listen to.
Page 214 RDS Messages disappear from the display until another new message is received. The old message can be displayed by pressing ALERT: Alert warns of national or local emergencies. the INFO button until a new message is received or a You will not be able to turn off alert announcements. different station is tuned to.
Page 215 Radio Messages If you want to insert a tape when the ignition is off, first press EJT or DISP. CAL ERR (Calibration Error): This message is displayed when the radio has not been calibrated If an error appears on the display, see “Cassette Tape properly for the vehicle.
Page 216 2 NEXT: Press this pushbutton to go to the next (Dolby): Press this pushbutton to reduce selection on the tape. If you press the pushbutton more background noise. NR ON will appear on the display. than once, the player will continue moving forward Press it again to turn Dolby NR off.
Page 217 Cassette Tape Messages Playing a Compact Disc CHK TAPE (Check Tape): If CHK TAPE appears on Insert a disc partway into the slot, label side up. The the radio display, the tape won’t play because of one of player will pull it in and the disc should begin playing. the following errors.
Page 218 3 REV (Reverse): Press and hold this pushbutton to DISP (Display): Press this knob to see how long the reverse quickly within a track. Press and hold this current track has been playing. ET and the elapsed time pushbutton for less than two seconds to reverse at will appear on the display.
Page 219 Compact Disc Messages AM-FM Stereo with Six-Disc Compact Disc Player with Programmable If the disc comes out, it could be for one of the Equalization and Radio Data System (RDS) following reasons: (If Equipped) If you’re driving on a very rough road. When the road becomes smooth the disc should play.
Page 220 Playing the Radio Finding a Station PWR (Power): Push this knob to turn the system on AM FM: Press this button to switch between AM, FM1 and off. and FM2. The display shows your selection. VOLUME: Turn the knob clockwise to increase TUNE: Turn this knob to select radio stations.
Page 221 Setting Preset Stations To adjust bass, midrange or treble to the middle position, select BASS, MID or TREB and push and hold The six numbered pushbuttons let you return to the AUDIO knob. The radio will produce one beep and your favorite stations.
Page 222 Adjusting the Speakers (Balance/Fade) Using RDS AUDIO: To adjust the balance between the right and Your audio system is equipped with a Radio Data left speakers, push the AUDIO knob until BAL appears System (RDS). RDS mode gives you many useful new on the display.
Page 223 Finding a PTY Station AM FM (Alternate Frequency): Alternate frequency allows the radio to switch to a stronger station with the TYPE (Program Type): This button is used to turn same program type. Press and hold AM FM for two on and off Program Type (PTY) selections.
Page 224 RDS Messages TRAF (Traffic): Press this button to receive traffic announcements. The traffic announcement brackets will ALERT!: This type of announcement warns of national appear on the display. TRAF will appear on the display or local emergencies. You will not be able to turn off if the current station broadcasts traffic announcements.
Page 225 Playing a Compact Disc 2. Press and hold the LOAD side of the LOAD CD button for two seconds. If an error appears on the display, see “Compact Disc Messages” later in this section. You will hear a beep and the light, located to the right of the slot, will begin to flash.
Page 226 Playing a Specific Loaded Compact Disc If the disc is not removed, after 25 seconds, the disc will be automatically pulled back into the receiver. If you try For every CD loaded, a number will appear on the radio to push the disc back into the receiver, before the display.
Page 227 RPT (Repeat): With repeat, you can repeat one track or AUTO EQ (Automatic Equalization): Press AUTO an entire disc. To use repeat, do the following: EQ to select the desired preset equalization setting while playing a compact disc. The equalization will be To repeat the track you are listening to, press and automatically set whenever you play a compact disc.
Page 228 TYPE (Program Type): Press this knob to see how 3. Select the desired disc by pressing the numbered long the current track has been playing. To change what pushbutton and then use the SEEK SCAN right is normally shown on the display (track or elapsed arrow button to locate the track that you want to time), press the knob until you see the display you want, save.
Page 229 To delete tracks from the song list, perform the heard after four seconds. S LIST EMPTY will following steps: appear on the display indicating that the song list has been deleted. 1. Turn the disc player on. If a disc is ejected, and the song list contains saved 2.
Page 230 Rear Seat Audio (RSA) (If Equipped) Rear Seat Audio Controls This feature allows rear seat passengers to listen to and control any of the music sources: AM FM, cassette tapes and CDs, through the Rear Seat Audio (RSA) controller. However, the rear seat passengers can only control the music sources that the front seat passengers are not listening to.
Page 231 VOL (Volume): Press this knob lightly so it extends. While listening to a CD, press the right arrow to hear the Turn the knob clockwise to increase volume and next track on the CD. Press the left arrow to go back to counterclockwise to decrease volume.
Page 232 P.SET PROG (Preset Program): The front passengers Remote Cassette Tape Player (If Equipped) must be listening to something different for each of these functions to work: Press this button to scan through the preset radio stations set on the pushbuttons on the main radio. The radio will go to a preset station, play for a few seconds, then go on to the next preset station.
Page 233 To load a cassette tape with the ignition off, first press 3 NEXT: Press this pushbutton or the right SEEK arrow EJECT on the remote player. Then, insert the cassette (in the direction that the lighted tape direction arrow tape. The tape will play if the ignition is on but the radio points) to search for the next selection.
Page 234 AM FM: Press this button to listen to the radio Console-Mounted CD Changer when a tape is playing. The inactive tape will remain (If Equipped) in the player. CD AUX (Auxiliary): Press this button to play a tape when listening to the radio. The lighted arrow will appear next to the symbol and show the direction of play when a tape is active.
Page 235 Once you have loaded the discs in the magazine, slide the door to the right to open the compact disc changer (for the front console mounted changer, push the door to the right and it will open automatically). Push the magazine into the changer in the direction of the arrow marked on the magazine.
Page 236 If an error appears on the display, see “Compact Disc FWD 6 (Forward): Press and hold this pushbutton Messages” later in this section. to advance quickly through a track. Release it to resume playing. If your vehicle is equipped with the AM FM Stereo with Cassette Tape Player (Bose), all of the CD changer SEEK...
Page 237 1 PREV (Previous): Press this pushbutton to go to the 5: Press this pushbutton to select a disc. The disc previous track if the current track has been playing for number and track number will be displayed. less than eight seconds. If this pushbutton is pressed and FWD 6 (Forward): Press and hold this pushbutton the current track has been playing for more than eight to advance quickly through a track.
Page 238 Compact Disc Changer Errors Theft-Deterrent Feature (If Equipped) THEFTLOCK R is designed to discourage theft of your ERR (Error): If this message appears on the display, it could be for one of the following reasons: radio. It works by using a secret code to disable all radio functions whenever battery power is removed.
Page 239 Activating the Theft Deterrent Feature 5. Press MN and 000 will appear on the display. The instructions which follow explain how to enter your 6. Press MN again to make the last two digits agree secret code to activate the THEFTLOCK system. It is with your code.
Page 240 Unlocking the Theft Deterrent Feature After a Disabling the Theft Deterrent Feature Power Loss Enter your secret code as follows; pause no more than Enter your secret code as follows; pause no more than 15 seconds between steps: 15 seconds between steps: 1.
Page 241: Audio Steering Wheel Controls
If the code entered is incorrect, SEC will appear on the Audio Steering Wheel Controls display. The radio will remain secured until the correct (If Equipped) code is entered. If your vehicle has this feature, you can control certain When battery power is removed and later applied to a radio functions using the buttons on your steering wheel.
Page 242: Understanding Radio Reception
SEEK : Press the up or down arrow to seek to Understanding Radio Reception the next or previous radio station and stay there. If a cassette tape or compact disc is playing, the player The range for most AM stations is greater than for FM, will advance with the up arrow and reverse with the especially at night.
Page 243 Tips About Your Audio System NOTICE: Hearing damage from loud noise is almost undetectable until it is too late. Your hearing can adapt to higher Before you add any sound equipment to your volumes of sound. Sound that seems normal can be loud vehicle like a tape player, CB radio, mobile and harmful to your hearing.
Page 244: Care Of Your Cassette Tape Player
Care of Your Cassette Tape Player When cleaning the cassette tape player with the recommended non abrasive cleaning cassette, it is A tape player that is not cleaned regularly can cause possible that the cassette may eject, because the cut tape reduced sound quality, ruined cassettes or a damaged detection feature on your radio may recognize it as a mechanism.
Page 245 If your vehicle is equipped with the AM FM Stereo Cassettes are subject to wear and the sound quality with Cassette Tape Player and Automatic Tone Control may degrade over time. Always make sure the cassette or the AM FM Stereo with Cassette Tape Player (Bose) tape is in good condition before you have your tape do the following: player serviced.
Page 246: Fixed Mast Antenna
When cleaning the cassette tape player with the Care of Your Compact Discs recommended non abrasive cleaning cassette, it is Handle discs carefully. Store them in their original cases possible that the cassette may eject, because the cut tape or other protective cases and away from direct sunlight detection feature on your radio may recognize it as a and dust.
Page 247 Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving. Your Driving, the Road and Your Vehicle Driving at Night Defensive Driving Driving in Rain and on Wet Roads Drunken Driving...
Page 248: Your Driving, The Road And Your Vehicle
Driver behavior, the driving environment, and the vehicle’s design all affect how well a vehicle performs. But statistics show that the most important factor, by far, is how we drive. Knowing how these three factors work together can help you understand how your vehicle handles and what you can do to avoid many types of crashes, including a rollover crash.
Page 249: Driving Environment
Driving Environment But driver behavior factors are far more often the cause of a utility vehicle rollover than are environmental or You can also help avoid a rollover or other type of crash vehicle factors. Safe driver behavior and understanding by being prepared for driving in inclement weather, at the environment in which you’ll be driving can help night, or during other times where visibility or traction...
Page 250: Drunken Driving
Defensive driving requires that a driver concentrate on and driving. In recent years, about 16,000 annual motor the driving task. Anything that distracts from the driving vehicle related deaths have been associated with the use task such as concentrating on a cellular telephone call, of alcohol, with more than 300,000 people injured.
Page 251 According to the American Medical Association, a It’s the amount of alcohol that counts. For example, if lb. (82 kg) person who drinks three 12 ounce the same person drank three double martinis (3 ounces (355 ml) bottles of beer in an hour will end up with a or 90 ml of liquor each) within an hour, the person’s BAC of about 0.06 percent.
Page 252 But the ability to drive is affected well below a BAC of There’s something else about drinking and driving that 0.10 percent. Research shows that the driving skills of many people don’t know. Medical research shows that many people are impaired at a BAC approaching alcohol in a person’s system can make crash injuries 0.05 percent, and that the effects are worse at night.
Page 253: Control Of A Vehicle
Control of a Vehicle Braking You have three systems that make your vehicle go where Braking action involves perception time and you want it to go. They are the brakes, the steering and reaction time. the accelerator. All three systems have to do their work First, you have to decide to push on the brake pedal.
Page 254: Anti-Lock Brake System (Abs)
Avoid needless heavy braking. Some people drive in Anti-Lock Brake System (ABS) spurts heavy acceleration followed by heavy Your vehicle has anti lock brakes. ABS is an advanced braking rather than keeping pace with traffic. This is a electronic braking system that will help prevent a mistake.
Page 255 The anti lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. Let’s say the road is wet and you’re driving safely. Suddenly, an animal jumps out in front of you.
Page 256: Steering
Remember: Anti lock doesn’t change the time you need Steering Tips to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in Driving on Curves front of you, you won’t have time to apply your brakes It’s important to take curves at a reasonable speed.
Page 257: Steering In Emergencies
What should you do if this ever happens? Ease up on the Steering in Emergencies accelerator pedal, steer the vehicle the way you want it There are times when steering can be more effective to go, and slow down. than braking. For example, you come over a hill and Speed limit signs near curves warn that you should find a truck stopped in your lane, or a car suddenly pulls adjust your speed.
Page 258: Off - Road Recovery
Road Recovery You may find that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand.
Page 259: Passing
Passing Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one thing, The driver of a vehicle about to pass another on a following too closely reduces your area of vision, lane highway waits for just the right moment, especially if you’re following a larger vehicle.
Page 260: Loss Of Control
Check your mirrors, glance over your shoulder and Loss of Control start your left lane change signal before moving out Let’s review what driving experts say about what of the right lane to pass. When you are far enough happens when the three control systems (brakes, steering ahead of the passed vehicle to see its front in your and acceleration) don’t have enough friction where the inside mirror, activate your right lane change signal...
Page 261: Off - Road Driving With Your
A cornering skid and an acceleration skid are best Road Driving with Your handled by easing your foot off the accelerator pedal. Four Wheel Drive Vehicle If your vehicle starts to slide, ease your foot off the This off road guide is for vehicles that have accelerator pedal and quickly steer the way you want the four wheel drive.
Page 262 Before You Go Off-Roading CAUTION: There are some things to do before you go out. For example, be sure to have all necessary maintenance and service work done. Check to make sure all Cargo on the load floor piled higher than underbody shields (if so equipped) are properly the seatbacks can be thrown forward attached.
Page 263: Environmental Concerns
Environmental Concerns Traveling to Remote Areas road driving can provide wholesome and satisfying It makes sense to plan your trip, especially when going recreation. However, it also raises environmental to a remote area. Know the terrain and plan your route. concerns.
Page 264 Getting Familiar with Off-Road Driving Controlling your vehicle is the key to successful road driving. One of the best ways to control your It’s a good idea to practice in an area that’s safe and vehicle is to control your speed. Here are some things to close to home before you go into the wilderness.
Page 265: Scanning The Terrain
Scanning the Terrain When you drive over obstacles or rough terrain, keep a firm grip on the steering wheel. Ruts, troughs or other road driving can take you over many different kinds surface features can jerk the wheel out of your hands if of terrain.
Page 266: Approaching A Hill
Driving on Off-Road Hills On a large hill, the incline may get steeper as you near the top, but you may not see this because the crest of the road driving often takes you up, down or across a hill is hidden by bushes, grass or shrubs. hill.
Page 267 Driving Uphill Ease up on your speed as you approach the top of the hill. Once you decide you can safely drive up the hill, you Attach a flag to the vehicle to make you more visible need to take some special steps. to approaching traffic on trails or hills.
Page 268 What should I do if my vehicle stalls, or is about As you are backing down the hill, put your left hand on the steering wheel at the 12 o’clock position. This to stall, and I can’t make it up the hill? way, you’ll be able to tell if your wheels are straight If this happens, there are some things you should and maneuver as you back down.
Page 269 Suppose, after stalling, I try to back down the hill and decide I just can’t do it. CAUTION: What should I do? Set the parking brake, put your transmission in Shifting the transfer case to NEUTRAL can PARK (P) (or the manual transmission in cause your vehicle to roll even if the transmission is in PARK (P) (or, if you have the manual FIRST (1)) and turn off the engine.
Page 270: Driving Downhill
Driving Downhill CAUTION: When off roading takes you downhill, you’ll want to consider a number of things: Heavy braking when going down a hill can cause How steep is the downhill? Will I be able to maintain your brakes to overheat and fade. This could vehicle control? cause loss of control and a serious accident.
Page 271 Are there some things I should not do when Am I likely to stall when going downhill? driving down a hill? It’s much more likely to happen going uphill. But if Yes! These are important because if you it happens going downhill, here’s what to do. ignore them you could lose control and have a Stop your vehicle by applying the regular brakes.
Page 272: Driving Across An Incline
Driving Across an Incline Hidden obstacles can make the steepness of the incline even worse. If you drive across a rock with Sooner or later, an off road trail will probably go across the uphill wheels, or if the downhill wheels drop into the incline of a hill.
Page 273: Stalling On An Incline
What if I’m driving across an incline that’s not too steep, but I hit some loose gravel and start to slide downhill. What should I do? If you feel your vehicle starting to slide sideways, turn downhill. This should help straighten out the vehicle and prevent the side slipping.
Page 274: Driving In Water
Driving in Mud, Sand, Snow or Ice CAUTION: When you drive in mud, snow or sand, your wheels won’t get good traction. You can’t accelerate as quickly, turning is more difficult, and you’ll need longer Driving on frozen lakes, ponds or rivers can be braking distances.
Page 275 If the water isn’t too deep, then drive through it slowly. After Off-Road Driving At fast speeds, water splashes on your ignition system Remove any brush or debris that has collected on the and your vehicle can stall. Stalling can also occur if underbody, chassis or under the hood.
Page 276: Driving At Night
Driving at Night Here are some tips on night driving. Drive defensively. Don’t drink and drive. Except Vehicles with Electrochromic Day/Night Inside Rearview Mirror: Adjust your inside rearview mirror to reduce the glare from headlamps behind you. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles.
Page 277 What you do in the daytime can also affect your night Keep your windshield and all the glass on your vehicle vision. For example, if you spend the day in bright clean inside and out. Glare at night is made much sunshine you are wise to wear sunglasses.
Page 278: Driving In Rain And On Wet Roads
Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction.
Page 279 CAUTION: Wet brakes can cause accidents. They won’t work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.
Page 280: Driving Through Flowing Water
Hydroplaning doesn’t happen often. But it can if your Driving Through Flowing Water tires do not have much tread or if the pressure in one or more is low. It can happen if a lot of water is standing on the road.
Page 281: City Driving
City Driving Here are ways to increase your safety in city driving: Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross country trip.
Page 282: Freeway Driving
Freeway Driving At the entrance, there is usually a ramp that leads to the freeway. If you have a clear view of the freeway as you drive along the entrance ramp, you should begin to check traffic. Try to determine where you expect to blend with the flow.
Page 283: Before Leaving On A Long Trip
The exit speed is usually posted. Here are some things you can check before a trip: Reduce your speed according to your speedometer, not Windshield Washer Fluid: Is the reservoir full? to your sense of motion. After driving for any distance Are all windows clean inside and outside? at higher speeds, you may tend to think you are going Wiper Blades: Are they in good shape?
Page 284: Highway Hypnosis
Highway Hypnosis Hill and Mountain Roads Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 285 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make CAUTION: your trips safer and more enjoyable. See “Off Road Driving” in the Index for information about Coasting downhill in NEUTRAL (N) or with the driving off road.
Page 286: Winter Driving
Winter Driving Here are some tips for winter driving: Have your vehicle in good shape for winter. You may want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and reflective warning triangles.
Page 287 Whatever the condition smooth ice, packed, blowing or loose snow drive with caution. Accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. Your anti lock brakes improve your vehicle’s stability when you make a hard stop on a slippery road.
Page 288 If You’re Caught in a Blizzard Tie a red cloth to your vehicle to alert police that you’ve been stopped by the snow. Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats anything you can wrap around yourself or...
Page 289: Recreational Vehicle Towing
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again CAUTION: and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the Snow can trap exhaust gases under your vehicle.
Page 290 Here are some important things to consider before you Dinghy Towing (Two-Wheel Drive do recreational vehicle towing: Models Only) What’s the towing capacity of the towing vehicle? Be sure you read the tow vehicle manufacturer’s recommendations. How far will you tow? Some vehicles have restrictions on how far and how long they can tow.
Page 291 In rare cases when it’s unavoidable and your vehicle Be sure to use the proper towing equipment designed for must be towed with all four wheels on the ground, the recreational vehicle towing. Follow the instructions for propeller shaft to axle yoke orientation should be the towing equipment.
Page 292 Dolly Towing (Two-Wheel Drive In rare cases when it’s unavoidable and your vehicle must be towed with all four wheels on the ground, the Models Only) propeller shaft to axle yoke orientation should be marked and the propeller shaft removed following the applicable service manual removal/installation procedure.
Page 293: Loading Your Vehicle
Be sure to use the proper towing equipment designed for Loading Your Vehicle recreational vehicle towing. Follow the instructions for the towing equipment. CAUTION: Shifting a four wheel drive vehicle’s transfer case into NEUTRAL can cause your vehicle to roll even if the transmission is in PARK (P), for an automatic transmission, or if your vehicle is in gear, for a manual transmission.
Page 294 The Certification/Tire label also tells you the maximum Using heavier suspension components to get added weights for the front and rear axles, called Gross Axle durability might not change your weight ratings. Ask Weight Rating (GAWR). To find out the actual loads on your dealer to help you load your vehicle the right way.
Page 295 Payload CAUTION: The payload capacity is shown on the Certification/Tire label. This is the maximum load capacity that your vehicle can carry. Be sure to include the weight of the Things you put inside your vehicle can strike occupants as part of your load. If you added any and injure people in a sudden stop or turn, or in accessories or equipment after your vehicle left the a crash.
Page 296: Towing A Trailer
Towing a Trailer NOTICE: (Continued) important information about towing a trailer CAUTION: with your vehicle. Additional rear axle maintenance is required for a vehicle used to tow If you don’t use the correct equipment and drive a trailer. See “Scheduled Maintenance Services” properly, you can lose control when you pull a in the Index.
Page 297: If You Do Decide To Pull A Trailer
If You Do Decide To Pull A Trailer If you have an automatic transmission, you can use THIRD (3) (or, as you need to, a lower gear) when If you do, here are some important points: towing a trailer. Operating your vehicle in THIRD (3) when towing a trailer will minimize heat There are many different laws, including speed limit buildup and extend the life of your transmission.
Page 298 Tow/Haul Mode (V6 Engine, Automatic The tow/haul mode is most effective when the vehicle Transmission Equipped Models) (If Equipped) and trailer combined weight is at least 75% of the Gross Combination Weight Rating (GCWR). The tow/haul mode is a feature that assists when pulling a heavy trailer.
Page 299: Weight Of The Trailer
Weight of the Trailer How heavy can a trailer safely be? It depends on how you plan to use your rig. For example, speed, altitude, road grades, outside temperature and how much your vehicle is used to pull a trailer are all important. And, it can also depend on any special equipment that you have on your vehicle.
Page 300 Vehicle Axle Ratio Max. Trailer Wt. *GCWR 3.42 3,900 lbs. (1 770 kg) 8,000 lbs. (3 632 kg) Four Wheel Drive, Two Door Manual Trans. . . ZR2 ....... . . 3.73 4,600 lbs.
Page 301: Weight Of The Trailer Tongue
You can ask your dealer for our trailering information or advice, or you can write us at the address listed in your Warranty and Owner Assistance Information Booklet. In Canada, write to: General Motors of Canada Limited Customer Communication Centre, 163 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 Weight of the Trailer Tongue...
Page 302 Total Weight on Your Vehicle’s Tires Hitches Be sure your vehicle’s tires are inflated to the upper It’s important to have the correct hitch equipment. limit for cold tires. You’ll find these numbers on the Crosswinds, large trucks going by and rough roads are a Certification label at the rear edge of the driver’s door or few reasons why you’ll need the right hitch.
Page 303: Safety Chains
Safety Chains Trailer Brakes You should always attach chains between your vehicle If your trailer weighs more than 1,000 lbs. (450 kg) and your trailer. Cross the safety chains under the tongue loaded, then it needs its own brakes and they must be of the trailer to help prevent the tongue from contacting adequate.
Page 304: Driving With A Trailer
Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the CAUTION: trailer.
Page 305: Following Distance
Following Distance Making Turns Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without a trailer. This NOTICE: can help you avoid situations that require heavy braking and sudden turns. Making very sharp turns while trailering could Passing cause the trailer to come in contact with the vehicle.
Page 306: Turn Signals When Towing A Trailer
Turn Signals When Towing a Trailer If you have an automatic transmission, you can tow in DRIVE (D). You may want to shift the transmission to When you tow a trailer, your vehicle has to have extra THIRD (3) or, if necessary, a lower gear selection if the wiring and a heavy duty turn signal flasher (included in transmission shifts too often (e.g., under heavy loads...
Page 307: Parking On Hills
Parking on Hills 5. If you have a four wheel drive vehicle with an automatic transfer case, be sure the transfer case is in a drive gear not in NEUTRAL. CAUTION: 6. Release the regular brakes. You really should not park your vehicle, with a CAUTION: trailer attached, on a hill.
Page 308: Maintenance When Trailer Towing
When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for 1. Apply your regular brakes and hold the pedal down more on this.
Page 309: Trailer Wiring Harness
Trailer Wiring Harness Dark Blue: Use for electric trailer brakes or auxiliary wiring (eight wire harness only). The light duty trailer wiring is a six wire harness Red: Use for battery charging; it connects to the assembly. The optional heavy duty trailer wiring is an starter solenoid (eight wire harness only).
Page 310 Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. Hazard Warning Flashers Cooling System Other Warning Devices Engine Fan Noise Jump Starting If a Tire Goes Flat Towing Your Vehicle Changing a Flat Tire Engine Overheating Spare Tire...
Page 311: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning flasher button is located on the top of the steering column. Your hazard warning flashers work no matter what position your key is in, and even if the key isn’t in. Press the button to make the front and rear turn signal lamps flash on and off.
Page 312: Jump Starting
Jump Starting NOTICE: If your battery has run down, you may want to use another vehicle and some jumper cables to start your Ignoring these steps could result in costly damage vehicle. Be sure to the follow the steps below to do to your vehicle that wouldn’t be covered by it safely.
Page 313 1. Check the other vehicle. It must have a 12 volt NOTICE: battery with a negative ground system. If you leave your radio on, it could be badly NOTICE: damaged. The repairs wouldn’t be covered by your warranty. If the other system isn’t a 12 volt system with a negative ground, both vehicles can be damaged.
Page 314 CAUTION: CAUTION: Using a match near a battery can cause battery Fans or other moving engine parts can injure you gas to explode. People have been hurt doing this, badly. Keep your hands away from moving parts and some have been blinded. Use a flashlight if once the engine is running.
Page 315 6. Connect the red 8. Now connect the black positive (+) cable to the negative ( ) cable to the positive (+) terminal of negative ( ) terminal of the dead battery. Use a the good battery. Use a remote positive (+) remote negative ( terminal if the vehicle terminal if the vehicle...
Page 316 10. Now start the vehicle with the good battery and run the engine for awhile. 11. Try to start the vehicle that had the dead battery. If it won’t start after a few tries, it probably needs service. NOTICE: Damage to your vehicle may result from electrical shorting if jumper cables are removed incorrectly.
Page 317: Towing Your Vehicle
To disconnect the jumper cables from both vehicles, If Steam Is Coming From Your Engine do the following: 1. Disconnect the black negative ( ) cable from the vehicle that had the dead battery. 2. Disconnect the black negative ( ) cable from the vehicle with the good battery.
Page 318 If No Steam Is Coming From Your Engine CAUTION: If you get an engine overheat warning but see or hear no steam, the problem may not be too serious. Sometimes the engine can get a little too hot when you: Steam from an overheated engine can burn you badly, even if you just open the hood.
Page 319: Cooling System
If you no longer have the overheat warning, you can Cooling System drive. Just to be safe, drive slower for about 10 minutes. When you decide it’s safe to lift the hood, here’s what If the warning doesn’t come back on, you can you’ll see: drive normally.
Page 320 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you can be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned.
Page 321 How to Add Coolant to the Coolant NOTICE: Recovery Tank If you haven’t found a problem yet, but the coolant level Engine damage from running your engine isn’t at the ADD mark, add a 50/50 mixture of clean, without coolant isn’t covered by your warranty. drinkable water and DEX COOL engine coolant at the...
Page 322 NOTICE: CAUTION: In cold weather, water can freeze and crack the You can be burned if you spill coolant on hot engine, radiator, heater core and other parts. engine parts. Coolant contains ethylene glycol Use the recommended coolant and the proper and it will burn if the engine parts are hot coolant mixture.
Page 323 CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, and if you turn the radiator pressure cap even a little they can come out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot.
Page 324: How To Add Coolant To The Radiator
How to Add Coolant to the Radiator 2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot.
Page 325 3. Fill the radiator with the proper DEX COOL 4. Then fill the coolant recovery tank to ADD mark. coolant mixture, up to the base of the filler neck. See 5. Put the cap back on the coolant recovery tank, but “Engine Coolant”...
Page 326 6. Start the engine and let it run until you can feel the 8. Then replace the pressure cap. At any time during upper radiator hose getting hot. Watch out for the this procedure if coolant begins to flow out of the engine cooling fan.
Page 327: Engine Fan Noise
Engine Fan Noise If a Tire Goes Flat This vehicle has a clutched engine cooling fan. When It’s unusual for a tire to “blow out” while you’re driving, the clutch is engaged, the fan spins faster to provide especially if you maintain your tires properly. If air goes more air to cool the engine.
Page 328: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard 4. Turn off the engine. warning flashers. 5. Put the wheel blocks at the front and rear of the tire farthest away from the one being changed.
Page 329: Spare Tire
Removing the Spare Tire and Tools NOTICE: The jacking equipment you’ll need is stored along the driver’s side inner rear quarter panel. In some cases, you Never remove or restow a tire from/to a stowage may have to remove the spare tire in order to reach the position under the vehicle while the vehicle is jack.
Page 330 3. Turn the wheel wrench counterclockwise to lower The locking wheel nut the spare tire. Keep turning the wheel wrench until can be removed by the spare tire has been completely lowered. Tilt the snapping the rubber retainer at the end of the cable and pull it through weather cover off the the wheel opening.
Page 331 Insert the key and pull the lock case straight off. It is not necessary to turn the key. Put the spare tire near the flat tire. The tools you’ll be using include the jack (A) and wheel wrench (B). Your vehicle may also have an optional hub cap removal tool.
Page 332 Removing the Wheel Cover If you have individual wheel nut caps that cover each nut, they must be removed in order to get to the wheel Position the chisel end of your wheel wrench, or the hub nuts. Use the socket end of the wheel wrench to remove cap removal tool (if equipped), in the notch of the hub the wheel nut caps.
Page 333 Removing the Flat Tire and Installing the Spare Tire A. Front Frame Hole B. Rear Frame Hole (2 Door) or Spring Hanger Hole (4 Door) 1. Using the wheel wrench, loosen all the wheel nuts. Don’t remove them yet. 2. Turn the jack handle clockwise to raise the jack lift head.
Page 334 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly 4.
Page 335 6. Remove any rust or dirt from the wheel bolts, CAUTION: mounting surfaces and spare wheel. Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident.
Page 336 8. Put the nuts on by CAUTION: hand. Make sure the rounded end is toward the wheel. Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 7.
Page 337 10. Use the wrench to tighten the wheel nuts firmly in a crisscross sequence as shown. 9. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely. 5-28...
Page 338 NOTICE: CAUTION: Improperly tightened wheel nuts can lead to Incorrect wheel nuts or improperly tightened brake pulsation and rotor damage. To avoid wheel nuts can cause the wheel to become loose expensive brake repairs, evenly tighten the wheel and even come off. This could lead to an accident. nuts in the proper sequence and to the proper Be sure to use the correct wheel nuts.
Page 339 Storing a Flat or Spare Tire and Tools Follow this diagram to store the CAUTION: underbody mounted spare. Storing a jack, a tire or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone.
Page 340 1. Put the tire on the ground at the rear of the vehicle, with the valve stem pointed down and to the rear. 2. Pull the retainer through the wheel. 3. Put the chisel end of the wheel wrench, on an angle, through the hole in the rear bumper and into the hoist shaft.
Page 341 Follow this diagram for the inside mounted spare. Follow this diagram for the rear mounted spare. A. Spare or Flat Tire A. Wheel Carrier B. Retainer B. Spare or Flat Tire C. Nut C. Wheel Nut and Locking Nut Cylinder D.
Page 342 6. Reinstall the locking wheel nut using the wheel Use the following diagram as a guide. wrench. Then push the lock case onto the lug nut until it stops. The key does not have to be inserted into the lock. Push the lock case to be sure it is secured.
Page 343 Spare Tire Compact Spare Tire (If Equipped) The compact spare tire is a temporary replacement tire Your vehicle, when new, had a fully inflated spare tire. made to perform at speeds up to 65 mph (105 km/h) and A spare tire, whether compact size or full size, may lose for distances up to 3,000 miles (5 000 km).
Page 344: If You're Stuck: In Sand, Mud, Ice Or Snow
NOTICE: CAUTION: When the compact spare is installed, don’t take If you let your tires spin at high speed, they can your vehicle through an automatic car wash with explode, and you or others could be injured. And, guide rails. The compact spare can get caught on the transmission or other parts of the vehicle can the rails.
Page 345: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle To Get It Out Using the Recovery Hooks First, turn your steering wheel left and right. That will clear the area around your front wheels. If you have a four wheel drive vehicle, shift into 4HI. Then shift back and forth between REVERSE (R) and a forward gear (or with a manual transmission, between FIRST (1) or SECOND (2) and REVERSE (R)), spinning the wheels...
Page 346 CAUTION: These hooks, when used, are under a lot of force. Always pull the vehicle straight out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back. NOTICE: Never use the recovery hooks to tow the vehicle.
Page 347 Section 6 Service and Appearance Care Here you will find information about the care of your vehicle. This section begins with service and fuel information, and then it shows how to check important fluid and lubricant levels. There is also technical information about your vehicle, and a part devoted to its appearance care.
Page 348: Doing Your Own Service Work
Service Doing Your Own Service Work If you want to do some of your own service work, you’ll Your dealer knows your vehicle best and wants you to want to use the proper service manual. It tells you much be happy with it. We hope you’ll go to your dealer for more about how to service your vehicle than this manual all your service needs.
Page 349: Gasoline Octane
Fuel CAUTION: Gasoline Octane Use regular unleaded gasoline with a posted octane of You can be injured and your vehicle could be 87 or higher. If the octane is less than 87, you may get a damaged if you try to do service work on a heavy knocking noise when you drive.
Page 350: California Fuel
California Fuel In Canada, look for the “Auto Makers’ If your vehicle is certified to meet California Emission Choice” label on Standards (see the underhood emission control label), it the pump. is designed to operate on fuels that meet California specifications.
Page 351: Fuels In Foreign Countries
Additives NOTICE: Some gasolines that are not reformulated for low emissions may contain an octane enhancing additive Your vehicle was not designed for fuel that called methylcyclopentadienyl manganese tricarbonyl contains methanol. Don’t use fuel containing (MMT); ask the attendant where you buy gasoline methanol.
Page 352: Filling Your Tank
Filling Your Tank CAUTION: Gasoline vapor is highly flammable. It burns violently, and that can cause very bad injuries. Don’t smoke if you’re near gasoline or refueling your vehicle. Keep sparks, flames and smoking materials away from gasoline. The fuel cap is behind a hinged door on While refueling, hang the fuel cap by the tether from the driver’s side of...
Page 353 When you put the fuel cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure CAUTION: you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly If you get gasoline on yourself and then installed.
Page 354: Checking Things Under The Hood
Filling a Portable Fuel Container Checking Things Under the Hood CAUTION: CAUTION: Never fill a portable fuel container while it is in Things that burn can get on hot engine parts and your vehicle. Static electricity discharge from the start a fire. These include liquids like fuel, oil, container can ignite the gasoline vapor.
Page 355: Hood Release
Hood Release Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the To open the hood, do the following: hood prop. 1. Pull the handle Remove the hood prop from the slot in the hood and located inside the return the prop to its retainer.
Page 356: Engine Compartment Overview
Engine Compartment Overview When you open the hood, you will see the following: A. Battery E. Automatic Transmission Dipstick H. Engine Air Cleaner/Filter (If Equipped) B. Coolant Recovery Tank I. Clutch Master Cylinder Reservoir F. Power Steering Reservoir C. Engine Oil Dipstick J.
Page 357: Engine Oil
Engine Oil Turn off the engine and give the oil several minutes to drain back into the oil pan. If you don’t, the oil dipstick Checking Engine Oil might not show the actual level. Pull out the dipstick and clean it with a paper towel or It’s a good idea to check your engine oil every time you cloth, then push it back in all the way.
Page 358: When To Add Engine Oil
When to Add Engine Oil What Kind of Engine Oil to Use If the oil is at or below the ADD line, then you’ll need Oils recommended for your vehicle can be identified by to add at least one quart of oil. But you must use the looking for the starburst symbol.
Page 359 As in the chart shown previously, SAE 5W 30 is best for your vehicle. However, you can use SAE 10W 30 if it’s going to be 0 C) or above. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils, such as SAE 20W NOTICE: Use only engine oil with the American Petroleum...
Page 360: Engine Oil Additives
Engine Oil Additives Driving under these conditions causes engine oil to break down sooner. If any one of these is true for your Don’t add anything to your oil. The recommended oils vehicle, then you need to change your oil and filter with the starburst symbol are all you will need for good every 3,000 miles (5 000 km) or 3 months whichever...
Page 361: What To Do With Used Oil
Remote Oil Filter (Four Wheel Drive) What to Do with Used Oil Used engine oil contains certain elements that may be The access door for the unhealthy for your skin and could even cause cancer. remote oil filter is in the Don’t let used oil stay on your skin for very long.
Page 362: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter 3. Insert a new air filter, if needed. 4. Reinstall the engine air cleaner/filter cover. Refer to the Maintenance Schedule to determine when to replace the engine air cleaner/filter. See “Scheduled Maintenance Services” in the Index. CAUTION: Operating the engine with the air cleaner/filter off can cause you or others to be burned.
Page 363: Automatic Transmission Fluid
Automatic Transmission Fluid How to Check Because this operation can be a little difficult, you may When to Check and Change choose to have this done at the dealership service A good time to check your automatic transmission fluid department. level is when the engine oil is changed.
Page 364 Wait at least 30 minutes before checking the Checking the Fluid Level transmission fluid level if you have been driving: Prepare your vehicle as follows: When outside temperatures are above 90 F (32 Park your vehicle on a level place. Keep the engine At high speed for quite a while.
Page 365 Then, without shutting off the engine, follow these steps: The transmission dipstick handle has this symbol on it. The transmission dipstick is located near the center of the engine compartment . See “Engine Compartment 3. If the fluid level is in the acceptable range, push the Overview”...
Page 366: How To Add Fluid
How to Add Fluid Manual Transmission Fluid Refer to the Maintenance Schedule to determine what When to Check kind of transmission fluid to use. See “Recommended A good time to have it checked is when the engine oil is Fluids and Lubricants” in changed.
Page 367: Hydraulic Clutch
Check the fluid level only when your engine is off, the How to Add Fluid vehicle is parked on a level place and the transmission is Here’s how to add fluid. Refer to the Maintenance cool enough for you to rest your fingers on the Schedule to determine what kind of fluid to use.
Page 368: Rear Axle
When to Check and What to Use Rear Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See “Scheduled Maintenance Services” in the Index. How to Check Lubricant Refer to the Maintenance Schedule to determine how often you should check the fluid level in your clutch...
Page 369: Transfer Case
What to Use How to Check Lubricant Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Lubricants” in the Index. Four Wheel Drive (If Equipped) Lubricant checks in this section also apply to these vehicles.
Page 370: Front Axle
What to Use How to Check Lubricant Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Lubricants” in the Index. Front Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it.
Page 371: Engine Coolant
What to Use A 50/50 mixture of clean, drinkable water and COOL R coolant will: Refer to the Maintenance Schedule to determine what kind of lubricant to use. See “Recommended Fluids and Give freezing protection down to Lubricants” in the Index. Give boiling protection up to 265 F (129 Engine Coolant...
Page 372 What to Use NOTICE: Use a mixture of one half clean, drinkable water and half DEX COOL coolant which won’t damage If you use an improper coolant mixture, your aluminum parts. If you use this coolant mixture, you engine could overheat and be badly damaged. don’t need to add anything else.
Page 373 Checking Coolant The coolant recovery tank is located in the engine compartment near the passenger side of the vehicle. See “Engine Compartment Overview” in the Index for more information on location. The vehicle must be on a level surface. When your engine is cold, the coolant level should be at ADD, or a little higher.
Page 374 Adding Coolant CAUTION: If you need more coolant, add the proper DEX COOL coolant mixture at the coolant recovery tank. You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol, CAUTION: and it will burn if the engine parts are hot enough.
Page 375: Radiator Pressure Cap
Radiator Pressure Cap Power Steering Fluid The power steering reservoir is located near the front of the engine compartment on the driver’s side of NOTICE: the vehicle. Your radiator cap is a 15 psi (105 kPa) pressure type cap and must be tightly installed to prevent coolant loss and possible engine damage from overheating.
Page 376: Windshield Washer Fluid
When to Check Power Steering Fluid What to Use It is not necessary to regularly check power steering To determine what kind of fluid to use, see fluid unless you suspect there is a leak in the system or “Recommended Fluids and Lubricants” in the Index. you hear an unusual noise.
Page 377: Adding Washer Fluid
Adding Washer Fluid NOTICE: The windshield washer fluid reservoir is located toward the front of the engine compartment on the driver’s side When using concentrated washer fluid, of the vehicle. See “Engine Compartment Overview” in follow the manufacturer’s instructions for the Index for more information on location.
Page 378: Brake Fluid
Brakes of the brake system. If it is, you should have your brake system fixed, since a leak means that sooner or later your Brake Fluid brakes won’t work well, or won’t work at all. So, it isn’t a good idea to “top off” your brake fluid. Adding brake fluid won’t correct a leak.
Page 379 Checking Brake Fluid What to Add You can check the brake fluid without taking off the cap. When you do need brake fluid, use only DOT 3 brake fluid. Refer to “Recommended Fluids and Lubricants” in the Index. Use new brake fluid from a sealed Just look at the brake container only.
Page 380: Brake Wear
Brake Wear NOTICE: Your vehicle has four wheel disc brakes. Disc brake pads have built in wear indicators that make a Using the wrong fluid can badly damage high pitched warning sound when the brake pads are brake system parts. For example, just a few worn and new pads are needed.
Page 381: Brake Adjustment
Some driving conditions or climates may cause a brake Brake Adjustment squeal when the brakes are first applied or lightly Every time you make a brake stop, your disc brakes applied. This does not mean something is wrong with adjust for wear. your brakes.
Page 382 Battery Vehicle Storage If you’re not going to drive your vehicle for 25 days Your new vehicle comes with a maintenance free or more, remove the black, negative ( ) cable from ACDelco battery. When it’s time for a new battery, get the battery.
Page 383: Bulb Replacement
Bulb Replacement Headlamps See “Replacement Bulbs” in the Index for the proper Piece Composite Headlamp System types of bulbs to use. For any bulb changing procedure 1. Open the hood. not listed in this section, contact your GM dealer’s service department. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and...
Page 384 5. Turn the bulb/socket assembly counterclockwise to remove it. 6. Put the new bulb/socket assembly into the headlamp assembly and turn it clockwise until it is tight. 7. Plug in the electrical connector. 8. Put the headlamp assembly back into the vehicle. 9.
Page 385 Piece Composite Headlamp System 1. Open the hood. 4. Turn the bulb/socket assembly counterclockwise to remove it. 5. Put the new bulb/socket assembly into the headlamp 2. Remove the black retainer clips by lifting up. assembly and turn it clockwise until it is tight. 3.
Page 386 One-Piece Front Turn Signal Lamps Two-Piece Front Turn Signal Lamps 1. Remove the headlamp assembly as shown under 1. Remove the headlamp assembly as shown under “One Piece Composite Headlamp System” earlier in “Two Piece Composite Headlamp System” earlier in this section.
Page 387 4. Turn the harness bulb socket counterclockwise to remove it. 5. Pull the bulb straight out to remove it from the socket. 6. Push the new bulb into the socket until it snaps into place. 7. Reinstall the harness bulb socket with the new bulb into the headlamp assembly and turn it clockwise until it is tight.
Page 388: Windshield Wiper Blade Replacement
Taillamps 7. Put the socket into the assembly and turn the socket clockwise until it locks in place. 1. Open the endgate. 8. Install the lamp assembly and tighten the screws. 2. Remove the two screws 9. Close the endgate. from the lamp assembly.
Page 389 3. Remove the insert from the blade assembly. The insert has two notches at one end that are locked by the bottom claws of the blade assembly. At the notched end, pull the insert from the blade assembly. A. Blade Assembly D.
Page 390: Backglass Wiper Blade Replacement
5. Be sure that the notches are locked by the bottom 6. Put the blade assembly pivot in the wiper arm claws. Make sure that all other claws are properly hook. Pull up until the pivot locking tab locks in the locked on both sides of the insert slots.
Page 391 Tires CAUTION: (Continued) Your new vehicle comes with high quality tires made by a leading tire manufacturer. If you ever have questions Underinflated tires pose the same danger as about your tire warranty and where to obtain service, see overloaded tires. The resulting accident your GM Warranty booklet for details.
Page 392 Inflation -- Tire Pressure NOTICE: The Certification/Tire label, which is on the driver’s door edge, above the door latch, shows the correct Don’t let anyone tell you that underinflation or inflation pressures for your tires when they’re cold. overinflation is all right. It’s not. If your tires “Cold”...
Page 393: Tire Inspection And Rotation
When to Check Tire Inspection and Rotation Check your tires once a month or more. Also, check the Tires should be rotated every 6,000 to 8,000 miles tire pressure of the spare tire. (10 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check If you have a compact spare tire, it should be wheel alignment.
Page 394 If your vehicle has a compact spare tire or a spare tire that does not match your vehicle’s regular road tires and wheels in size and type, do not include the spare in the tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Certification/Tire label.
Page 395 When It’s Time for New Tires You need a new tire if any of the following statements are true: One way to tell when You can see the indicators at three or more places it’s time for new tires around the tire. is to check the treadwear indicators, which will You can see cord or fabric showing through the...
Page 396: Buying New Tires
Buying New Tires CAUTION: To find out what kind and size of tires you need, look at the Certification/Tire label. Mixing tires could cause you to lose control while The tires installed on your vehicle when it was new had driving.
Page 397: Uniform Tire Quality Grading
Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating based on Quality grades can be found where applicable on the tire the wear rate of the tire when tested under controlled sidewall between tread shoulder and maximum section conditions on a specified government test course.
Page 398: Wheel Alignment And Tire Balance
Temperature A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, and C, The wheels on your vehicle were aligned and balanced representing the tire’s resistance to the generation of carefully at the factory to give you the longest tire life heat and its ability to dissipate heat when tested under and best overall performance.
Page 399: Wheel Replacement
Wheel Replacement CAUTION: Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. If the Using the wrong replacement wheels, wheel bolts wheel leaks air, replace it (except some aluminum or wheel nuts on your vehicle can be dangerous.
Page 400: Tire Chains
Used Replacement Wheels Tire Chains CAUTION: CAUTION: Putting a used wheel on your vehicle is Don’t use tire chains. There’s not enough dangerous. You can’t know how it’s been used or clearance. Tire chains used on a vehicle without how far it’s been driven. It could fail suddenly the proper amount of clearance can cause and cause a crash.
Page 401: Appearance Care
Appearance Care Turpentine Lacquer Thinner Remember, cleaning products can be hazardous. Some are toxic. Others can burst into flame if you strike a Nail Polish Remover match or get them on a hot part of the vehicle. Some are They can all be hazardous some more than dangerous if you breathe their fumes in a closed space.
Page 402: Special Fabric Cleaning Problems
Cleaning of Fabric/Carpet 4. Apply cleaner with a clean sponge. Don’t saturate the material and don’t rub it roughly. Your dealer has cleaners for the cleaning of fabric and 5. As soon as you’ve cleaned the section, use a sponge carpet.
Page 403: Cleaning Leather
Stains caused by candy, ice cream, mayonnaise, chili Cleaning Leather sauce and unknown stains can be removed as follows: Use a soft cloth with lukewarm water and a mild soap or 1. Carefully scrape off excess stain. saddle soap and wipe dry with a soft cloth. Then, let the leather dry naturally.
Page 404: Cleaning Interior Plastic Components
Cleaning Interior Plastic Components Cleaning Glass Surfaces Use only a mild soap and water solution on a soft Glass should be cleaned often. GM Glass Cleaner or a cloth or sponge. Commercial cleaners may affect the liquid household glass cleaner will remove normal surface finish.
Page 405: Cleaning The Outside Of Your Vehicle
Cleaning the Outside of the Cleaning the Outside of Your Vehicle Windshield, Backglass and The paint finish on your vehicle provides beauty, depth of color, gloss retention and durability. Wiper Blades Washing Your Vehicle If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, The best way to preserve your vehicle’s finish is to wax, sap or other material may be on the blade or...
Page 406: Finish Care
Cleaning Exterior Lamps/Lenses NOTICE: Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow Machine compounding or aggressive polishing on instructions under “Washing Your Vehicle.” a basecoat/clearcoat paint finish may dull the Finish Care finish or leave swirl marks.
Page 407: Cleaning Aluminum Wheels
Protecting Exterior Bright Metal Parts Don’t take your vehicle through an automatic vehicle wash that has silicon carbide tire cleaning brushes. Bright metal parts should be cleaned regularly to keep These brushes can also damage the surface of their luster. Washing with water is all that is usually these wheels.
Page 408: Chemical Paint Spotting
Finish Damage At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud Any stone chips, fractures or deep scratches in the finish and other debris can collect. Dirt packed in closed areas should be repaired right away.
Page 409 GM Vehicle Care/Appearance Materials 6-63...
Page 410: Engine Identification
Vehicle Identification Number (VIN) Engine Identification The 8th character in your VIN is the engine code. This code will help you identify your engine, specifications and replacement parts. Service Parts Identification Label You’ll find this label on the inside of the glove box. It’s very helpful if you ever need to order parts.
Page 411: Electrical System
Electrical System Headlamps The headlamp wiring is protected by an internal Add-On Electrical Equipment circuit breaker. An electrical overload will cause the lamps to go on and off, or in some cases to remain off. If this happens, have your headlamp wiring checked NOTICE: right away.
Page 412: Fuses And Circuit Breakers
Fuses and Circuit Breakers Instrument Panel Fuse Block The wiring circuits in your vehicle are protected from The instrument panel fuse short circuits by a combination of fuses and circuit block is located at the end breakers. This greatly reduces the chance of fires caused of the instrument panel on by electrical problems.
Page 413 Fuse/Circuit Usage Breaker Cruise Control Module and Switch, Body Control Module, Heated Seats Gages, Body Control Module, Instrument Panel Cluster Parking Lamps, Power Window Switch, Body Control Module, Ashtray Lamp Steering Wheel Radio Controls Headlamps Switch, Body Control Module, Headlamp Relay Courtesy Lamps, Battery Down Protection Fuse/Circuit...
Page 414: Engine Compartment Fuse Block
Engine Compartment Fuse Block Fuse/Circuit Usage Breaker Power Locks Motor 4WD Switch, Engine Controls (VCM, PCM, Transmission) Supplemental Inflatable Restraint Front Wiper Steering Wheel Radio Controls Radio, Battery Amplifier HVAC (Manual), HVAC I (Automatic), HVAC Sensors (Automatic) The engine compartment fuse block is located under the hood on the driver’s side of the vehicle.
Page 415 Name Usage RT TURN Right Turn Signal Front LT TURN Left Turn Signal Front HDLP W/W Not Used LT TRN Left Turn Signal Rear RT TRN Right Turn Signal Rear RR PRK Right Rear Parking Lamps TRL PRK Trailer Park Lamps LTHDLP Left Headlamp RTHDLP...
Page 416 Name Usage Name Usage Air Conditioning LR PRK Left Rear Parking Lamps W/W PMP Not Used IGN C Starter Solenoid, Fuel Pump, PRNDL HORN Horn HTDSEAT Heated Seat BTSI Automatic Transmission Shift HVAC HVAC System Lock Control System B/U LP Back Up Lamps TRCHMSL Trailer Center High Mount...
Page 417: Capacities And Specifications
Replacement Bulbs * Capacities and Specifications Engine Description ... . “VORTEC” 4300 Lamps Number Type ........Halogen Headlamps, 9006 HB4 or VIN Code...
Page 418 Capacities Air Conditioning Refrigerant Capacity Please refer to “Recommended Fluids and Lubricants” in the Index for more information. If you do your own service work, you’ll need the proper Cooling System* service manual. See “Doing Your Own Service Work” in the Index for additional information.
Page 419: Normal Maintenance Replacement Parts
Normal Maintenance Thermostat** ..... . . 12559051 Oil Filter* (2 Wheel Drive) . . . PF47 (PF52 Optional) Replacement Parts Oil Filter* (4 Wheel Drive) .
Page 420 Section 7 Maintenance Schedule This section covers the maintenance required for your vehicle. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction Part B: Owner Checks and Services Part A: Scheduled Maintenance Services Part C: Periodic Maintenance Inspections Short Trip/City Scheduled Maintenance Part D: Recommended Fluids and Lubricants Long Trip/Highway Scheduled Maintenance...
Page 421: Introduction
Introduction Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance procedures are important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper fluid levels or the wrong tire inflation can increase the level of emissions from your vehicle.
Page 422: How This Section Is Organized
How This Section is Organized “Part B: Owner Checks and Services” tells you what should be checked and when. It also explains This maintenance schedule is divided into five parts: what you can easily do to help keep your vehicle in good condition.
Page 423: Part A: Scheduled Maintenance Services
Part A: Scheduled The proper fluids and lubricants to use are listed in Part D. Make sure whoever services your vehicle Maintenance Services uses these. All parts should be replaced and all necessary repairs done before you or anyone else Using Your Maintenance Schedule drives the vehicle.
Page 424: Scheduled Maintenance
Scheduled Maintenance Short Trip/City Definition Short Trip/City Intervals Follow the Short Trip/City Scheduled Maintenance if Every 3,000 Miles (5 000 km): Engine Oil and Filter any one of these conditions is true for your vehicle: Change (or 3 months, whichever occurs first). Chassis Lubrication (or 3 months, whichever occurs first).
Page 425 Scheduled Maintenance Short Trip/City Intervals Long Trip/Highway Definition Every 60,000 Miles (100 000 km): Engine Accessory Follow this scheduled maintenance only if none of the Drive Belt Inspection. conditions from the Short Trip/City Scheduled Maintenance are true. Do not use this schedule if the Every 100,000 Miles (166 000 km): Spark Plug Wire vehicle is used for trailer towing, driven in a dusty area Inspection.
Page 426 Scheduled Maintenance Long Trip/Highway Intervals Long Trip/Highway Intervals Every 7,500 Miles (12 500 km): Engine Oil and Filter Every 60,000 Miles (100 000 km): Engine Accessory Change (or every 12 months, whichever occurs first). Drive Belt Inspection. Chassis Lubrication (or every 12 months, whichever Every 100,000 Miles (166 000 km): Spark Plug Wire occurs first).
Page 427: Short Trip/City Scheduled Maintenance
Short Trip/City Scheduled Maintenance The services shown in this schedule up to 100,000 miles # Lubricate the front suspension, ball joints, steering (166 000 km) should be repeated after 100,000 miles linkage, parking brake cable guides, propshaft splines, (166 000 km) at the same intervals for the life of universal joints and brake pedal springs.
Page 428 Short Trip/City Scheduled Maintenance 3,000 Miles (5 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 429 Short Trip/City Scheduled Maintenance 9,000 Miles (15 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 430 Short Trip/City Scheduled Maintenance 15,000 Miles (25 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Inspect engine air cleaner filter if you are driving in dusty conditions.
Page 431 Short Trip/City Scheduled Maintenance 18,000 Miles (30 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 432 Short Trip/City Scheduled Maintenance 24,000 Miles (40 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 433 Short Trip/City Scheduled Maintenance 30,000 Miles (50 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 434 Short Trip/City Scheduled Maintenance 33,000 Miles (55 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 435 Short Trip/City Scheduled Maintenance 39,000 Miles (65 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 436 Short Trip/City Scheduled Maintenance 45,000 Miles (75 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 437 Short Trip/City Scheduled Maintenance 48,000 Miles (80 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 438 Short Trip/City Scheduled Maintenance 51,000 Miles (85 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 439 Short Trip/City Scheduled Maintenance 57,000 Miles (95 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 440 Short Trip/City Scheduled Maintenance Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traffic where the outside temperature regularly reaches 90 F (32 C) or higher. –...
Page 441 Short Trip/City Scheduled Maintenance 63,000 Miles (105 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 442 Short Trip/City Scheduled Maintenance 69,000 Miles (115 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 443 Short Trip/City Scheduled Maintenance 75,000 Miles (125 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions:...
Page 444 Short Trip/City Scheduled Maintenance 78,000 Miles (130 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 445 Short Trip/City Scheduled Maintenance 84,000 Miles (140 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 446 Short Trip/City Scheduled Maintenance 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 447 Short Trip/City Scheduled Maintenance 93,000 Miles (155 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 448 Short Trip/City Scheduled Maintenance 99,000 Miles (165 000 km) DATE Change engine oil and filter (or every 3 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 3 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 449 Short Trip/City Scheduled Maintenance 150,000 Miles (240 000 km) DATE Drain, flush and refill cooling system (or every 60 months since last service, ACTUAL SERVICED BY: MILEAGE whichever occurs first). See “Engine Coolant” in the Index for what to use. Inspect hoses. Clean radiator, condenser, pressure cap and neck. Pressure test cooling system and pressure cap.
Page 450: Long Trip/Highway Scheduled Maintenance
Long Trip/Highway Scheduled Maintenance The services shown in this schedule up to 100,000 miles # Lubricate the front suspension, ball joints, steering (166 000 km) should be repeated after 100,000 miles linkage, parking brake cable guides, propshaft splines, (166 000 km) at the same intervals for the life of universal joints and brake pedal springs.
Page 451 Long Trip/Highway Scheduled Maintenance 7,500 Miles (12 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 452 Long Trip/Highway Scheduled Maintenance Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traffic where the outside temperature regularly reaches 90 _ F (32 _ C) or higher. –...
Page 453 Long Trip/Highway Scheduled Maintenance 30,000 Miles (50 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 454 Long Trip/Highway Scheduled Maintenance 37,500 Miles (62 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 455 Long Trip/Highway Scheduled Maintenance 45,000 Miles (75 000 km) (Continued) Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traffic where the outside temperature regularly reaches 90 _ F (32 _ C) or higher. –...
Page 456 Long Trip/Highway Scheduled Maintenance 52,500 Miles (87 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 457 Long Trip/Highway Scheduled Maintenance 60,000 Miles (100 000 km) (Continued) Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traffic where the outside temperature regularly reaches 90 F (32 C) or higher.
Page 458 Long Trip/Highway Scheduled Maintenance 67,500 Miles (112 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 459 Long Trip/Highway Scheduled Maintenance 75,000 Miles (125 000 km) (Continued) Change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: – In heavy city traffic where the outside temperature regularly reaches 90 _ F (32 _ C) or higher. –...
Page 460 Long Trip/Highway Scheduled Maintenance 90,000 Miles (150 000 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 461 Long Trip/Highway Scheduled Maintenance 97,500 Miles (162 500 km) DATE Change engine oil and filter (or every 12 months, whichever occurs first). ACTUAL SERVICED BY: MILEAGE An Emission Control Service. Lubricate chassis components (or every 12 months, whichever occurs first). (See footnote #.) Check rear/front axle fluid level and add fluid as needed.
Page 462 Long Trip/Highway Scheduled Maintenance 150,000 Miles (240 000 km) DATE Drain, flush and refill cooling system (or every 60 months since last service, ACTUAL SERVICED BY: MILEAGE whichever occurs first). See “Engine Coolant” in the Index for what to use. Inspect hoses.
Page 463: Part B: Owner Checks And Services
Part B: Owner Checks and Services Engine Coolant Level Check Check the engine coolant level and add DEX COOL Listed in this part are owner checks and services which coolant mixture if necessary. See “Engine Coolant” in should be performed at the intervals specified to help the Index for further details.
Page 464: At Least Twice A Year
At Least Twice a Year Spare Tire Check At least twice a year, after the monthly inflation check Restraint System Check of the spare tire determines that the spare is inflated to Make sure the safety belt reminder light and all your the correct tire inflation pressure, make sure that the belts, buckles, latch plates, retractors and anchorages are spare tire is stored securely.
Page 465 Manual Transmission Check At Least Once a Year Check the transmission fluid level; add if needed. See Key Lock Cylinders Service “Manual Transmission Fluid” in the Index. Check for leaks. A fluid leak is the only reason for fluid loss. Have Lubricate the key lock cylinders with the lubricant specified in Part D.
Page 466 Starter Switch Check 3. On automatic transmission vehicles, try to start the engine in each gear. The starter should work only in PARK (P) or NEUTRAL (N). If the starter works in CAUTION: any other position, your vehicle needs service. On manual transmission vehicles, put the shift lever in NEUTRAL (N), push the clutch down halfway When you are doing this check, the vehicle could...
Page 467 Automatic Transmission Shift Lock Control 3. With the engine off, turn the key to the RUN System Check position, but don’t start the engine. Without applying the regular brake, try to move the shift lever out of PARK (P) with normal effort. If the shift lever CAUTION: moves out of PARK (P), your vehicle needs service.
Page 468 Parking Brake and Automatic Transmission Park on a fairly steep hill, with the vehicle facing PARK (P) Mechanism Check downhill. Keeping your foot on the regular brake, set the parking brake. To check the parking brake’s holding ability: With CAUTION: the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal.
Page 469: Part C: Periodic Maintenance Inspections
Part C: Periodic Maintenance Exhaust System Inspection Inspections Inspect the complete exhaust system. Inspect the body near the exhaust system. Look for broken, damaged, Listed in this part are inspections and services which missing or out position parts as well as open seams, should be performed at least twice a year (for instance, holes, loose connections or other conditions which could each spring and fall).
Page 470: Throttle System Inspection
Throttle System Inspection Brake System Inspection Inspect the throttle system for interference or binding, Inspect the complete system. Inspect brake lines and and for damaged or missing parts. Replace parts as hoses for proper hook up, binding, leaks, cracks, needed. Replace any components that have high effort chafing, etc.
Page 471: Part D: Recommended Fluids And Lubricants
Part D: Recommended Fluids and USAGE FLUID/LUBRICANT Lubricants Hydraulic Delco Supreme 11 Brake Fluid Fluids and lubricants identified below by name, Brake System (GM Part No. 12377967 or part number or specification may be obtained from equivalent DOT 3 brake fluid). your dealer.
Page 472 USAGE FLUID/LUBRICANT USAGE FLUID/LUBRICANT Manual Synchromesh Transmission Fluid Rear Axle Axle Lubricant; use only GM Part Transmission (GM Part No. 12345349 or (Locking No. 1052271. Do not add friction equivalent). Differential) modifier. Automatic DEXRON III Automatic Transfer Case AUTO TRAK II Fluid Transmission Transmission Fluid.
Page 473 USAGE FLUID/LUBRICANT USAGE FLUID/LUBRICANT Constant Chassis Lubricant (GM Part Hood and Door Multi Purpose Lubricant, Velocity No. 12377985 or equivalent) or Hinges Superlube (GM Part Universal Joint lubricant meeting requirements No. 12346241 or equivalent). of NLGI # 2, Category LB Tailgate or GC Multi...
Page 474: Part E: Maintenance Record
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages. Also, you should retain all maintenance receipts. Your owner information portfolio is a convenient place to store them.
Page 475 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-56...
Page 476 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-57...
Page 477 Maintenance Record ODOMETER DATE SERVICED BY MAINTENANCE PERFORMED READING 7-58...
Page 478 Section 8 Customer Assistance Information Here you will find out how to contact GMC if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Customer Satisfaction Procedure Courtesy Transportation...
Page 479: Customer Satisfaction Procedure
Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to GMC. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 480 However, help, contact the GMC Consumer Relations Manager by if you continue to remain unsatisfied after following calling 1-800-GMC-8782 (1-800-462-8782, Customer the procedure outlined in Steps One and Two, you Assistance prompt).
Page 481: Customer Assistance For Text Telephone
Customer Assistance Offices number or write them at the following address: GMC encourages customers to call the toll-free number BBB Auto Line for assistance. If a U.S. customer wishes to write to Council of Better Business Bureaus, Inc.
Page 482: Gm Mobility Program For Persons
Canada GM Mobility Program for Persons General Motors of Canada Limited with Disabilities Customer Communication Centre, 163-005 1908 Colonel Sam Drive This program, available to Oshawa, Ontario L1H 8P7 qualified applicants, can reimburse you up to $1,000 1-800-263-3777 (English) toward aftermarket driver 1-800-263-7854 (French) or passenger adaptive 1-800-263-3830 (For Text Telephone devices (TTYs))
Page 483: Roadside Assistance
Maps include points of interest and a list of GMC dealers along the route. Also included is a list of hotels along the route that are discounted through GMC’s Roadside Assistance provides stranded owners...
Page 484: Canadian Roadside Assistance
The Roadside Assistance services listed are available and holidays. Should you have any questions about roadside assistance, call the GMC Roadside Assistance to retail and retail lease customers operating 2002 GMC Center or contact your dealer. light duty trucks for a period of 3 years/36,000 miles (60 000 km).
Page 485: Courtesy Transportation
New Vehicle Limited Warranty. Several transportation Warranty service can generally be completed while you options are available when warranty repairs are wait. However, if you are unable to wait GMC helps required. This will reduce your inconvenience during minimize your inconvenience by providing several warranty repairs.
Page 486: Additional Program Information
Public Transportation or Fuel Reimbursement You are responsible for fuel usage charges and may also be responsible for taxes, levies, usage fees, excessive If your vehicle requires overnight warranty repairs, mileage or rental usage beyond the completion of reimbursement up to $30 per day (five days maximum) the repair.
Page 487: Warranty Information
Canadian Vehicles: For warranty repairs during the REPORTING SAFETY Complete Vehicle Coverage period of the General DEFECTS TO THE UNITED Motors of Canada New Vehicle Limited Warranty, STATES GOVERNMENT alternative transportation may be available under the Courtesy Transportation Program. Please consult your If you believe that your vehicle has a defect which dealer for details.
Page 488: Reporting Safety Defects To General Motors
Transport Canada, in addition to notifying General us. Please call us at 1 8782 Motors of Canada Limited. You may write to: 8782), or write: Transport Canada Pontiac-GMC Customer Assistance Center 330 Sparks Street P.O. Box 33172 Tower C Detroit, MI 48232 5172...
Page 489: Service Publications Ordering Information
SERVICE PUBLICATIONS ORDERING INFORMATION Service Manuals Owner’s Information Service Manuals have the diagnosis and repair Owner publications are written specifically for owners information on engines, transmission, axle, suspension, and intended to provide basic operational information brakes, electrical, steering, body, etc. about the vehicle.

GMC JIMMY 2002 Manual

Section 1 Seats and Restraint Systems

Section 4 Your Driving and the Road

Section 5 Problems on the Road

Section 7 Maintenance Schedule

Section 8 Customer Assistance Information

Quick Links

Chapters

Related Manuals for GMC JIMMY 2002

Summary of Contents for GMC JIMMY 2002