DAELIM S-FIVE Service Manual page 163

Hide thumbs Also See for S-FIVE:
Table of Contents

Advertisement

● Check the commutator for :
-Damage or abnormal wear. → Replace with a new
one.
-Discoloration of the commutator bar. → Replace with
a new one.
-Metallic debris between commutator bars.→ Clean it
off.
● Check for continuity between pairs of commutator
bars.
● Make a continuity check between individual
commutator bars and the armature shaft.
● There should be no continuity.
● Check the bearings.
-Do not rotate smoothly. → Replace with a new one.
-Loose bearing. → Replace with a new one.
STARTER MOTOR ASSEMBLY
● Carefully insert the armature shaft into the front
bracket.
● Align the front bracket notch with the brush.
CAUTION
·The sliding surcfaces of the brushes can be damaged
if they are not installed properly.
STARTING SYSTEM
COMMUTATOR
COMMUTATOR BARS
BEARING
FRONT BRACKET
15-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sj50S-five sj50e

Table of Contents