IGNITION SYSTEM
SIDE STAND IGNITION
CUT-OFF SWITCH
INSPECTION
● Remove the plug maintenance cover/ center cover.
( 3-3 )
● Remove the coupler of the side stand switch.
● Check for continuity between the terminal as shown
below:
ITEM
TERMINAL
ON
BLACK/WHITE
(Side stand is
AND GREEN
Retracted)
OFF
BLACK/WHITE
(Side stand is
AND GREEN
Lowered)
REMOVAL
● Remove the floor side cover. ( 3-4 )
● Remove the plug maintenance cover/ center cover.
( 3-3 )
● Remove the side stand switch mounting 2 bolts.
● Release the wire clamps and remove the side stand
switch.
INSTALLATION
● Install in the reverse order of removal.
14-8
SPECIFICATION
NO
CONTINUITY
CONTINUITY
CLAMP
BOLTS
CENTER COVER
PLUG MAINTENANCE
COVER
FLOOR SIDE
SIDE STAND
COVER
SWITCH
SIDE STAND
SWITCH COUPLER
SIDE
STAND
SWITCH