TP-Link TL-WR841ND - Wireless N Router Atheros 2T2R 2.4GHz 802.11n 2.0 User Manual page 18

Wireless n router
Hide thumbs Also See for TL-WR841ND - Wireless N Router Atheros 2T2R 2.4GHz 802.11n 2.0:
Table of Contents

Advertisement

cancel the Using Proxy checkbox, and click OK to finish it.
2.
After successfully log in, you can click the Quick Setup menu to quickly configure your
Router.
3.
Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It's recommended that you make use of
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click Next to go on configuring.
4.
If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.
TL-WR841N/TL-WR841ND
Figure 3-5 Quick Setup
Figure 3-6 WAN Connection Type
- 11 -
Wireless N Router

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-wr841n

Table of Contents