ABB SACE Emax 2 Series, SACE Tmax XT Series, SACE Emax 2 IEC, SACE Emax 2 UL, SACE Emax 2 MS/DC-E, SACE Emax 2 VF, SACE Emax 2 ML, SACE Emax 2/E Manual

Parts

Assembly

3. F
   
4. W
   
5. XT7 W
   
6. XT7 W
   
7. XT7 W
   
8. XT7 W
   
11. For the trip unit disassembling sequence refer to the instruction sheet 1SDH001000R0523.
    For the release disassembling sequence refer to the instruction sheet 1SDH001000R0523.
12. III TOP
    
13. III TOP
    
14. III BOTTOM
    
15. III BOTTOM
    
18. IV BOTTOM
    
19. IV BOTTOM
    
20. Neutral on the right
    
21. Neutral on the right
    
22. Neutral on the right
    
23. Neutral on the right
    
24. Internal outlets III
    
25. Internal outlets IV
    
26. External outlets III/IV
    
28. For the trip unit reassembling sequence refer to the instruction sheet 1SDH001000R0523.
32. For E1.2 - XT7M
    
33. XT7 F
    
34. XT7 W
    
35. XT7 W
    
36. XT7 W
    
38. Installation procedure for the standard measurement enabler module
    
    • Insert Ekip TT E1.2 (1)
    • Turn on Ekip TT E1.2 (2)
    • Wait 10 seconds
    • WARNING LED flashing (3)
    • Press the INSTALL button (4) on the display of the Ekip Touch
    • Make sure there are no alarm icons present
    • In case of alarm icons consult manual