Table of Contents
Advertisement
If the connection is successful established, the following screen will appear, click close to
4.
finish the connection.
3.3 For Windows 7
TP-LINK Wireless Client Utility (TWCU) is not available for Windows 7. So after the Adapter's
driver has been installed, we have to use Windows WLAN Autoconfig to establish a connection.
Please follow the steps below.
1.
Click the icon
the available wireless network list. Select the SSID of your Access Point and click
Connect.
TL-WN851N
Figure 3-18
at the bottom of your screen in your system tray and then you will see
31
300Mbps Wireless N PCI Adapter
Advertisement
Table of Contents
