GettinG Started
initial Setup
To get started, you will need:
•
Your primary wireless router,
its network name (SSID), and
password. If it's a dual-band
router, please be sure you have
both SSIDs and passwords.
•
A personal computer
with a web browser
Step 1: Connect the cable to the
Ethernet port on your PC, and
then plug in the power supply.
Step 2: Open a browser, visit
http://Belkin.range, and follow
the onscreen instructions.
http://Belkin.range
2
Step 3: Once the Range
Extender has successfully
joined the wireless network,
disconnect it from the PC, and
unplug the power supply.
|