Chapter 5: Installing The Cisco Wvc210 Internet Camera Software; Configuring Basic Camera Settings - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Installing the Cisco WVC210 Internet Camera
Software

Configuring Basic Camera Settings

NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
The product CD for your camera includes a Setup Wizard software program,
which helps to set up your Cisco WVC210 Internet camera. There are two ways to
use the Wizard:
1. You can launch the Wizard from the CD without installing the software on the PC.
This option is useful if you do not want to install anything on your computer.
2. You can install the software on your computer. This option is useful if you will
install more cameras in the future, and don't want to search for the CD.
This chapter contains the following sections:
• Configuring Basic Camera Settings, page 20
• Configuring the Network Settings, page 26
Please note that Microsoft Internet Explorer (IE) is the official supported browser
for the Cisco WVC210 Internet camera.
If the Setup Wizard does not find your Cisco WVC210 camera, enable UPnP on
your computer. See instructions for enabling Universal Plug and Play (UPnP) in
Appendix A, "Troubleshooting."
5
20