[Server] page
[Mail] tab
Refer to page 29 for general information about this tab.
Setup items
SMTP server address *1
SMTP port *2
POP server address *1
Authentication
Sender's mail address
Important:
• W hen a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receive alarm
mails correctly.
*1
• W hen entering the host name for "SMTP server address" or "POP server address", it is necessary to con-
figure the DNS settings on the [Network] tab of the "Network" page. (☞ Page 54)
*2
• T he following port numbers are unavailable since they are already in use.
20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 995, 10 669, 10 670
*3
• W hen you don't know the authentication method to send e-mails, refer to the network administrator.
[FTP] tab
Refer to page 29 for general information about this tab.
Setup items
FTP server address *1
User name
Password
Control port *2
FTP mode
Important:
*1
• W hen entering the host name for "FTP server address", it is necessary to configure the DNS settings on
the [Network] tab of the "Network" page. (☞ Page 54)
*2
• T he following port numbers are unavailable since they are already in use.
20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 995, 10 669, 10 670
52
Type *3
User name
Password
Setting values (Underlined: default)
(Default: None (blank))
1 - 65535 (Default: 25)
(Default: None (blank))
None/POP before SMTP/SMTP
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
Setting values (Underlined: default)
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
1 - 65535 (Default: 21)
Passive/Active