[Alarm] Page; [Alarm] Tab - Panasonic WJ-GXE500 Operating Instructions Manual

[Alarm] page

[Alarm] tab

Refer to page 28 for general information about this tab. Refer to page 13 for further information about the actions.
Setup items
Alarm Terminal 1 *1 *2
Terminal 2 *1 *2
Terminal 3 *1 *2
VMD alarm
Command alarm
Camera site alarm
Video loss
Alarm image Alarm image FTP transmission *4 *5 *6
Directory name
File name
Post alarm
Image capture size
Image compression rate upon alarm detection
Image quality upon alarm detection
Alarm output Alarm output trigger
terminal setup
Alarm output type
Trigger output *9
Pulse width
AUX title AUX (Up to 10 characters)
Open (Up to 5 characters)
Close (Up to 5 characters)
Setting values (Underlined: default)
Ch1/Ch2/Ch3/Ch4
Off/Alarm input
Ch1/Ch2/Ch3/Ch4
Off/Alarm input/Alarm output
Ch1/Ch2/Ch3/Ch4
Off/Alarm input/Alarm output/AUX output
Command alarm *1 Ch1/Ch2/Ch3/Ch4
On/Off
Originating port num- 1 - 65 535 (Default: 8 181)
ber *3
Ch1 - Ch4 On/Off
Ch1 - Ch4 On/Off
On/Off
(Default: None (blank))
(Default: None (blank))
Transmission interval NTSC Model:
*7 0.1fps/0.2fps/0.33fps/0.5fps/1fps
PAL Model:
0.08fps/0.17fps/0.28fps/0.42fps/1fps
Number of images 1pic/2pics/3pics/4pics/5pics/6pics/7pics/
8pics/9pics/10pics/20pics/30pics/50pics/
100pics/200pics/300pics/500pics/
1000pics/2000pics/3000pics
Recording duration *8 (Default: 100 sec.)
QVGA/VGA
On/Off
0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/
9 Low
On/Off
Latch/Pulse
Open/Close
1 - 120 sec. (Default: 1 sec.)
(Default: AUX)
(Default: Open)
(Default: Close)
45