Specifications - Makita Ddf484 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Drilling capacities
Fastening capacities
No load speed
Overall length
Rated voltage
Battery cartridge
Net weight
Due to our continuing program of research and development,
without notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA): 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment
exposure.
AWARNING: Wearearprotection.
AWARNING: Thenoiseemissionduringactual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially
processed.
AWARNING:Besureto identifysafety mea-
sures to protect the operator
estimation of exposure
use (taking account of all parts of the operating
cycle such as the times
off and when it is running
trigger time).
Steel
Wood
Wood screw
Machine screw
High (2)
Low (I)
with a standard test
of
what kind of workpiece
that are based on an
in the actual conditions
when the tool is switched
idle in addition to the
BL1815N, BL1820,
the specifications
01/2003
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: drilling into metal
Vibrationemission(ah,D) : 2.5 m/s2or less
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration total value(s) has been
measured in accordance
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment
AWARNING:Thevibration emission during
actual use of the power
declared value(s)
the tool is used especially
is processed.
AWARNING: Besureto identify safety mea-
sures to protect
estimation of exposure
use (taking account
cycle such as the times when the tool is switched
off and when it is running
trigger time).
is
EC Declaration
For European
of
The EC declaration of conformity is included as Annex A
to this instruction
ENGLISH
4
DDF484
13 mm
38 mm
10 mm x 90 mm
O - 2,000 min
o - 500 min
172 mm
DC. 18 v
BL1820B BL1830, BL1840,
BL1830B, BL1840B,
BL1860B
1.8 kg
herein are subject to change
with a standard
of exposure.
tool can differ
depending on the ways in which
what kind of workpiece
the operator that are based
in the actual conditions
of all parts of the operating
idle in addition
of Conformity
countries only
manual.
BL1850,
BL1850B,
test method
from the
on an
of
to the