Consumption Values - Electrolux Ew6Hch28G User Manual

If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.

14. CONSUMPTION VALUES

14.1 Introduction
The user manual reports two different references for EU energy label and ecodesign
regulations.
• Reg. (EU) 932/2012 and Reg. (EU) 392/2012 valid up to 30 June 2025 is relate to the
Energy efficiency classes from A+++ to D.
• Reg. (EU) 2023/2534 valid from 1st July 2025 is related to the Energy label Efficiency
classes from A to G.
The QR code on the energy label supplied with the appliance provides a web link to the
information related to the performance of the appliance in the EU EPREL database. Keep
the energy label for reference together with the user manual and all other documents
provided with this appliance.
It is also possible to find the same information in EPREL using the link https://
eprel.ec.europa.eu and the model name and product number that you find on the rating
plate of the appliance. Refer to 'Product description' chapter for the position of the rating
plate.
14.2 Legend
kg Laundry load.
kWh Energy consumption.
hh:mm Programme duration.
% Initial moisture at the end of spinning phase and target final moisture at the end of drying pro‐
gramme.
The higher is the spin, the higher is the noise at spin, but lower is the initial moisture and energy
consumption when drying the laundry.
24 ENGLISH
• Incorrect setting of the conductivity sensor
OPTIONS: Dryness Level -
( See chapter "
Adjustment of target final moisture " for
better setting).
• The airflow slots are clogged.
• Room temperature is too low or too high
( optimal room temperature 18°C to 25°C )
rpm Spun at