Cleaning The Humidity Sensor - Electrolux Ew6Hch28G User Manual

3. Turn the levers to unlock the condenser
lid and lower the condenser lid. .
1 1
4. If necessary, remove the fluff from the
condenser and its compartment. You can
use a vacuum cleaner with a brush
attachment.
5. Close the condenser lid.
6. Turn the levers until it clicks into position.
7. Put the filter back.
2 2
2

12.6 Cleaning the humidity sensor

CAUTION!
Risk of humidity sensor damage. Do not
use abrasive materials or steel wool to
clean the sensor.
To assure best drying results the appliance is
equipped with metal humidity sensor. It is
placed on the inner side of the door area.
Over usage time the surface of the sensor
may get dirty which deteriorates the drying
performance.
We recommend to clean the sensor at least 3
or 4 times a year or if you observe the drop of
drying performance.
To clean you can use harder side of dish-
washing sponge and bit of vinegar or dish
soap.
To clean the sensor:
1. Open the loading door.
2. Clean the surfaces of the humidity sensor
wiping off the metal surface several
times.
1
ENGLISH 21