Cleaning The Filter - Electrolux Ew6Hch28G User Manual

Empty the water container
Clean the Heat Exchanger
Clean the humidity sensor
Clean drum
Clean the control panel and housing
Clean the airflow slots
The following paragraphs explain how you should clean each part.
12.2 Removing the foreign items
Make sure that the pockets are empty
and all loose elements are tied up before
running the drying cycle. Refer to the
"Preparing the laundry" section.
Remove any foreign items that you may find
in the drum after the drying cycle (e.g. metal
clips, buttons, coins, etc).

12.3 Cleaning the filter

At the end of each cycle the
comes on and you must clean the filter.
The filter collects the lint during the
drying cycle.
To achieve the best drying performance
clean the filter regularly. The clogged
filter causes the longer drying cycle and
as a consequence the energy
consumption increase.
Clean the filter by hand. Use a vacuum
cleaner if necessary.
CAUTION!
When cleaning the filters, the lint should
be thrown in the garbage bin and not
washed through the drain in order to
avoid spreading microplastics in the used
water system.
1. Open the door. Pull the filter up.
When the indicator
When the indicator
At least 3 or 4 times a year
Every two months
Every two months
Every two months
2. Push the hook to open the filter.
filter indicator
3. Gather lint with hand from both internal
Throw the lint in the dustbin.
4. If necessary, clean the filter with a
5. If necessary, remove lint from the filter
flashes
flashes
1
1
parts of the filter.
vacuum cleaner. Close the filter.
socket and gasket. You can use a
vacuum cleaner. Place the filter back
inside the filter socket.
2
2
ENGLISH 19