Logitech FLIGHT RUDDER PEDALS Manual

GETTING STARTED

INTRODUCTION

Logitech G Flight Rudder Pedals are solid 3-axis rudder pedals designed to maximize realism by enabling foot control of the rudder and brakes function in flight simulation PC Games. The Rudder Pedals work with any Logitech G Flight products.

THE USB CABLE

Insert the Logitech G Flight Rudder Pedals USB plug into one of your PC's free USB sockets.

INSTALLATION FOR WINDOWS^® 10, WINDOWS^® 8.1 AND WINDOWS^® 7

DRIVER INSTALLATION

1. Visit logitech.com/support/rudder-pedals to download the latest drivers and software for your operating system.
2. With device disconnected, follow the onscreen instructions to complete the installation.
3. At the Driver Setup screen, only when prompted, insert USB cable into one of your computer's USB ports, then click Next.
4. At the Driver Setup screen, click Next to test your controller.
5. When the Logitech Controller screen appears, test the controls to verify device operation. After the test, click OK.

SOFTWARE INSTALLATION

1. In the Software Setup screen, click Next and a pop-up box will ask if you "want to trust software from Logitech." Click yes, then click Next.
2. After installation, you have the option to Run Profile Editor, which will show you the programming environment. To skip the Profile Editor now, uncheck the box and click Finish to complete installation.

Build your whole cockpit with our modular, interchangeable system.

TECHNICAL SUPPORT

Online Support: support.logitech.com
logitechG.com