Specifications; Intended Use - Makita Hp003G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Drilling capacities
Fastening capacities
No load speed (RPM)
Blows per minute
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The net weight value includes the lightest and heaviest combination of the attachment(s) for normal and safe
use and battery cartridge(s) which are specified in the instruction manual.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

Intended use

The tool is intended for impact drilling in brick, brickwork
and masonry. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (L
Sound power level (L ) : 96 dB (A)
WA
Uncertainty (K) : 3 dB (A)
Masonry
Steel
Wood
Wood screw
Machine screw
High (3)
Medium (2)
Low (1)
High (3)
Medium (2)
Low (1)
) : 88 dB (A)
pA
Self-feed bit: 92 mm
D.C. 36 V - 40 V max
BL4020 / BL4025 / BL4040 / BL4040F* / BL4050F* / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC / DC40WA / BCC01 / BCC02
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
can also be used in a preliminary assessment of
exposure.
5 ENGLISH
HP003G
20 mm
20 mm
Auger bit: 50 mm
Hole saw: 152 mm
10 mm x 90 mm
M6
-1
0 - 2,400 min
-1
0 - 1,800 min
-1
0 - 650 min
-1
0 - 36,000 min
-1
0 - 27,000 min
-1
0 - 9,750 min
197 mm
2.8 - 4.0 kg