You can utilize CanoScan Toolbox CS effectively by using various image adjusting and enhancing func-
tions of Plug-in Module CS. Refer to the Plug-in Module CS User's Guide bundled with your scanner for
its installation and functions.
Using the Editing Commands
The commands on the Edit menu allow you to cut, copy, paste, clear, select all, deselect, and set scanning
preferences for images.
To reverse the effects of a command you have selected, choose the Undo command.
To cut a portion of the image:
Select an area to cut using the select tool.
Choose the Cut command.
To copy a portion of the image:
Select an area to copy using the select tool.
Choose the Copy command.
To paste a selection onto the image:
Place the cursor where you want to put the selection.
Choose the Paste command.
To delete a portion of the image:
Select an area to delete by using the select tool.
Choose the Clear command.
To select everything in the image, choose the Select All command.
To deselect items you have selected using either the Lasso or Select tools, choose the None command.
CanoScan Toolbox CS