Advertisement
Table of Contents
Un-package and familiarize yourself with the contents.
1. Remove plastic engine skid plate and retain for use when mount kit is removed
from the ATV.
2.
Place the 2 U bolts over the main frame tubes just ahead of the footrests loosely
attach the mount plate to the front U bolts with the 3/8 Nylock nuts and washers
provided.
3.
Raise the rear of the mount plate up to the main frame tubes and place the 2
rear U bolts over the frame tubes in this position, guide the 2 rear U bolts through the
mount plate and loosely attach it to the U bolts with the 5/16 Nylocks and washers
provided.
4.
Center and square the mount plate and securely tighten all hardware.
12463
ATV MOUNT KIT PBA-6560
1-877-627-5860
REV.
Advertisement
Table of Contents
Related Manuals for Swisher PowerBlade PBA-6560
Summary of Contents for Swisher PowerBlade PBA-6560
- Page 1 1-877-627-5860 ATV MOUNT KIT PBA-6560 Un-package and familiarize yourself with the contents. 1. Remove plastic engine skid plate and retain for use when mount kit is removed from the ATV. Place the 2 U bolts over the main frame tubes just ahead of the footrests loosely attach the mount plate to the front U bolts with the 3/8 Nylock nuts and washers provided.
- Page 2 Item Description Part No. U-Bolt - Small NB720 5/16 Washer NB275 5/16-18 Nylock Nut NB181 U-Bolt - Large 12447 3/8 Washer NB272 3/8-16 Nylock Nut NB182 Hair Pin NB127 Clevis Pin 10305 Mount Plate...
Need help?
Do you have a question about the PowerBlade PBA-6560 and is the answer not in the manual?
Questions and answers