Clifford 3.3X Owner's Manual page 54

▀
Remote Start
Press . Remote start LED blinks for 3 seconds and remote start
tone sounds.
▀
Rear Defogger
Press four times, and then press
ON.) Remote start LED turns ON, and you will hear 1 beep.
▀
To disable the remote start system
Move the shutdown toggle switch to the OFF position.
1
Location of Shutdown Toggle Switch___________________
▀
Valet Mode
Press two times and then
LED blink and remote beeps one time. When valet Mode OFF, the
remote beeps two-times.
▀
Valet take over
Before turning off the engine, press and release
seconds. Then wait a few seconds.
Turn the ignition key to the OFF position.
The engine will remain running until the programmed time elapses
or a shut-down input is received.
Location of Valet button_________________________________
(only after remote start is
. The UNLOCK LED and Function
X
A U
2
3
4
5
6
. within 3