Table Of Zones; Interpreting Zone Diagnostics - Clifford 3.3X Owner's Manual

Table of zones

A zone is represented by the number of LED flashes used by the system
to identify a particular type of input. Standard input assignments are
listed in the following table, along with spaces to write in any optional
sensors or switches that have been installed.
Zone Description
1 Trunk Pin
2 Instant trigger: a heavier
impact detected by the
shock sensor
3 Door switch trigger
4 Instant trigger: For
optional sensors
5 Ignition trigger
6 Hood Pin

Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notification when arming or a Tamper
Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks by the
LED.
For example: If zone 3 was active or triggered, the LED will blink three
times with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on.

Dealer installed options
© 2008 Directed Electronics—all rights reserved