Transmitter Configuration - Clifford 3.3X Owner's Manual

Transmitter configuration

Level
Button
LOCK
UNLOCK
REMOTE START
AUX
FUNCTION
Note:
Button
Press one time to Arm Lock LED blink for one
Arm
Press one time to
Disarm
Disarm
Press one time to acti-
vate Remote Start
Remote
A U X
Start
Press and hold for 1.5
X
A U
seconds to activate the
AUX
Trunk Release.
Press 1 to 4 times.
( See Function shift
Function
table.)
Shift
Pressing more than one button simultaneously generates an Error tone and the F-Shift
LED turns ON .
© 2008 Directed Electronics—all rights reserved
REMOTE CONTROL FUNCTIONS TABLE
x 0
ARM
DISARM
REMOTE
START
TRUNK
RELEASE
FUNCTION TEMPERATURE
SHIFT
(2-way Only)
button must be pressed and finally held to access state.
Command
x 1 x 2
SILENT SENSOR
ARM BYPASS
SILENT
VALET MODE
DISARM
RUNTIME
TIMER MODE
RESET
AUX 1 AUX 2
CABIN
ARM STATUS
REQUEST (2-way Only)
Confirmation Feedback
(2-way remote only)
2
second with 1 Beep and
siren tone
3
Unlock LED blink for one
second with 2 Beeps
4
Remote start LED blinks
for 3 seconds, Remote
5
Start tones.
The AUX LED comes on
6
for 3 seconds, and AUX
activation tone sounds.
LED indicators turn on
(according to the feature
command.)
x 3 x 4
ARMED ARMED
(SILENT (SILENT
SENSOR) TRIGGER)
CAR FINDER —
REAR
SMART START
DEFOGGER
AUX 3 —
LAST
RUNTIME
TRIGGER
CHECK
REQUEST
(2-way Only)
(2-way Only)
Notes
Press/hold for 1.5 seconds
to Arm the system and then
activate the Panic output
This is an optional
feature. See your sales
rep/installer for details.
Each Press then release,
shifts the function of the
command button.