Controlling Your Devices Individually; Setting The Backlight Timing; Using The Teletext Buttons; Using The Glow Button - Logitech 915-000085 - Harmony 510 Advanced Universal Remote Control User Manual

Controlling your devices individually

In some cases, you may need to control a device individually. You can use the device feature of
the Harmony 510 to control devices one-by-one.
When you press the Device button, the Harmony 510 screen displays a list of your devices.
Select the device you wish to control. After you select a device, the Harmony 510 controls only
that device. You have access to all the commands for the device included in your Harmony One
configuration.
Once you've finished, return to Activities for the optimal control of your entertainment system.

Setting the backlight timing

The Harmony 510 senses when you pick it up, and lights up the display and buttons.
To set the length of time the backlight stays on, follow these steps:
From your Harmony Remote Software:
1. Select Remote Settings.
2. Select Display Settings.

Using the Teletext Buttons

When you press any of the Teletext buttons, the home page for Teletext will appear on
the television (it may take a few seconds for the page to appear). The Teletext page will
completely replace the television picture, but sound will still be available. Each Teletext
page has a unique 3-digit page number; all pages can be accessed by entering the 3-digit
page number using the numbered channel buttons on your Harmony remote.

Using the Glow Button

Press the Glow button to light up or turn off the display backlight. To determine the length
of time the backlight stays on.
Note: Shaking or tilting the Harmony remote will not light up the display backlight. Users
must press the Glow button to light up the display backlight. The remote will go into Deep
Sleep mode when the remote detects no motion for two hours. The remote will begin
motion sensing in Deep Sleep mode, and any motion or movement in front of the remote
While Teletext is the default setting for these buttons in the
Watch TV Activity, you can customize these buttons to send
different commands in other Activities. See Adding custom-
labeled buttons to an Activity.
9