Emptying The Water Container; Cleaning The Condenser - Electrolux Ew6H28G User Manual

2

12.4 Emptying the water container

Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
water container symbol comes on the display
and you must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Drain the water into a basin or equivalent
receptacle.
3. Place the water container back into
position.
20 ENGLISH
1
4. To continue the programme press the
Start/Pause button.

12.5 Cleaning the condenser

If the symbol of the condenser flashes
on the display, inspect the condenser and its
compartment. If it is dirty, clean it. Do the
check not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare
hands. Risk of injury. Wear protective
gloves. Clean carefully to avoid
damaging the metal surface.
WARNING!
Do not use vacuum cleaner with a hard
attachment to remove the fluff from the
condenser, it may damages the ribs of
the condenser, with leads to lower
performance of the appliance and longer
time drying.
To inspect:
1. Open the door. Pull the filter up.
1
2. Open the condenser cover.
2