Connecting/Disconnecting The Device; Accessibility; Safe Listening - Acer Xb323K User Manual

Note: When using a microfiber cloth:
1. Make sure the microfiber cloth is clean.
2. Wipe the dirty areas in one direction until the dirt is removed.
*If there is still residual dirt, use other clean section of the microfiber cloth
to wipe the dirt.
3. When finished, rinse the microfiber cloth with detergent and dry the
microfiber cloth completely.
4. Place the microfiber cloth back into the original packaging to ensure it
does not get dust on it.

Connecting/disconnecting the device

Observe the following guidelines when connecting and disconnecting power from
the LCD monitor:
• Make sure the monitor is attached to its base before connecting the power
cord to the AC power outlet.
• Make sure both the LCD monitor and the computer are turned off before
connecting any cable or unplugging the power cord.
• If the system has multiple sources of power, disconnect power from the system
by unplugging all power cords from the power supplies.

Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power from the equipment, be sure to unplug the power cord from
the electrical outlet.

Safe listening

To protect your hearing, follow these instructions.
• Gradually increase the volume until you can hear it clearly and comfortably
and without distortion.
• After setting the volume level, do not increase it after your ears have adjusted.
• Limit the amount of time listening to music at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can't hear people speaking near you.
iv