PRESONUS FIRESTUDIO LIGHTPIPE - V2.0 User Manual page 3

SAFE OPERATION GUIDELINES
To avoid damage to your FireStudio Lightpipe and your other audio equipment please review and adhere to the
following safety guidelines:
 Follow the safety guidelines in the manual.
 Do not drop your FireStudio Lightpipe.
 Do not install the unit near a heat source (radiators, heat registers, amplifier heat sinks, etc.).
 Do not expose your FireStudio Lightpipe to liquids. Do not place containers filled with liquids
near your FireStudio Lightpipe.
 Do not allow dust particles to collect in excess on your FireStudio Lightpipe. Keeping the unit
covered when not in use is highly recommended and will extend the life of your product.
 Protect the power cord from being walked on, wheeled over, or pinched. If the power cord
becomes damaged, purchase a new one.
 Unplug your FireStudio Lightpipe when not in use for long periods of time and during electrical
storms, hurricanes, tornadoes, and other extreme weather.
 Use only the attachments/accessories recommended or manufactured by PreSonus for your
FireStudio Lightpipe.
 All domestic PreSonus products should be serviced at the PreSonus factory in Baton Rouge,
Louisiana. If your FireStudio Lightpipe requires a repair, contact techsupport@presonus.com
to arrange for a return-authorization number. Customers outside the U.S. should contact their
local distributor. Your distributor's contact information is available at www.presonus.com