Back Panel - PRESONUS DigiMax FS User Manual

OVERVIEW

1.3 Back Panel

Note that all inputs and outputs can be use simultaneously.
Inserts. The DigiMax FS features insert points for each input. (RING=SEND) This allows
any external processing to be done before the output stage on each channel
independently.
Direct Analog Output. The DigiMax FS has direct analog balanced outputs for each
input channel.
ADAT Output. This optical ADAT output sends eight channels of digital audio output.
The DigiMax FX is capable of sending eight channels at 24-bit/96k sample rate (SMUX).
When using sample rates of 44.1K and 48k, all 8 channels are sent out one light pipe
output labeled 1-8 just above the light pipe connector. When using 88.2K or 96K sample
rate, channels 1-4 are sent out the ADAT light pipe connection labeled 1-4, and channels
5-8 are sent out the ADAT light pipe connection labeled 5-8 (below connector).
ADAT Input. This optical ADAT output receives eight channels of digital audio input. The
DigiMax FX is capable of receiving eight channels at 24-bit/96k sample rate (SMUX).
When using sample rates of 44.1K and 48k, all 8 channels are received into one light
pipe input labeled 1-8 just above the light pipe connector. When using 88.2K or 96K
sample rate, channels 1-4 are received into the ADAT light pipe connection labeled 1-4,
and channels 5-8 are received into the ADAT light pipe connection labeled 5-8 (below
connector).
DAC Output. (Digital to Analog Converter). Balanced ¼" TRS analog outputs of the
converted digital optical ADAT input signals. Converts ADAT optical input to analog
output.
6