Epson AP-60 - Projector Sound Solution User Manual page 13

4
Verify that the
Mic
microphone.
5 Adjust the microphone sensitivity by rotating the
necessary.
Note
If your system has more than one microphone, make sure that each microphone is on a different channel. The sound
cannot be received properly when multiple microphones are used on the same channel.
The sound from the microphone is transmitted from the black dome on the front of the microphone. Be sure to keep
this part of the microphone free of obstructions when in use.
Audio from the microphone may not be transmitted reliably when the microphone is used up against a wall or in a
corner.
light on the AP-60 is lit. The light should match the
Mic lights
Channel selector
Gain control wheel
Channel
control wheel on the pendant microphone, if
Gain
13
selector on the pendant