Thank you tor purchasing this unit. For optimum performance, follow these operating instructions carefully. WARNING: The serial number of this product may be found label affixed bottom of the unit. REDUCE RISK FIRE You should note the serial number of this unit in the ELECTRIC SHOCK, DO NOT EXPOSE space...
UMPORTANT SAFETY INSTRUCTIONS If an extension cord is used with this product, make 1. Read all of these instructions. sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the 2. Save these instructions for iater use.
LOCATION CONTROLS (Back) '118 Foot Controller O Speaker Eject Button (4 EJECT) O Power Switch (POWER) O Pause Button ( n PAUSE) @ Power Indicator (POWER) Volume Control (VOLUME) O Recording Indicator (REC) O Tone Control (TONE) O Quick Erase Indicator O Built-in Microphone (MIC) (QUICK ERASE) O Auto Back Space Control...
VSC (Variable Speech Control) SYSTEM The VSCfeatureallowsyouto controltheplaybackspeed of the tape while maintaining pitch of the originalre- cording. This feature is most effective with voice (spoken word) recordings and should not be used during the play- back of music. While the tape speed can be varied from 0.85 to 2 times the normal tape speed, VSCwill only func- tion to correct the pitch between the settingsof 1 to 2 of the Tape Speed Control.
Set the VSC Switch to "OUT'. o Insert a cassette tape. Follow the numbered order. 1 Pres thePower Switch Headset (Included) The Power Indicator will light up. POWER The sound from noFF POWER the speaker cut off when headset is con- nected to the Press the Playback Button.
Page 7
PLAYBACK O Silent Auto-Stop O Fast Forward Rewind When the tape reaches its end, during playback, recording, When the unit is in the stop mode, (Tape Running Indicator fast forward, or rewind, the tape travel will automatically light off), pressing the Fast Forward/Cue Button or the stop.
RECORDING • Set the VSC Switch to "OUT'. • Insert a cassette tape. • Follow the numbered order. External Micro- 1 Press thePower Switch. phone The Power Indicator will light up. (not included) POWER AOFF — / POWER When the external microphone is con- nected, the Built-in...
Page 9
RECORDING O Quick Erase Erasing 1. Press the Pause Button to the "LOCK" position (Z— Previously recorded sounds on the tape are automatically erased when a new recording is made and only the new Press the Record Button and the Rewind/Review But- recording remains.
CONNECTIONS a To Monitor Jack Head set (included) To Mic/Remote Jack External Microphone (not included) O To Foot Controller Jack Foot Controller (included) Notes: o Do not connect anything to the MIC Jack when recording with the Built-in Microphone, since this will cut off the Built-in Microphone and make it impossible to record with it.
MAINTENANCE O Head Cleaning While pressing Erase Prevention Lever. press the Record HEAD DEMAGNETIZATION and Playback Button. In order to maintain good sound quality during This allows the Heads to move outward for easier clean- recording and playback, it is recommended that ing.
Ofconsumer controls. or PRODUCT SERVICE Should your Panasonic product ever require service, refer to enclosed Directory for an Authorized Servicenter or consult your authorized Panasonic dealer for detailed instructions. SERIAL NUMBER: Located...
Need help?
Do you have a question about the RR-830 and is the answer not in the manual?