Page of 2
   
Windows
HP 900 Inkjet Printer
1
Remove ALL tape and cardboard packing material.
2
1
4
Slide paper guide to the left. Pull out extension.
Load white paper.
1
2
6
Insert print cartridges. Push cartridges
firmly until they 'click' into place.
8
Connect USB cable.
9
Install printer software
1 A wizard displays on your computer.
2 Follow the screens.
3 Insert the CD when directed.
Windows XP / Windows 2000
2
Plug in power supply.
3
5
Open top cover.
1
3
Purchase a USB cable separately
if it is not included.
4 Click Finish in the first wizard.
5 The installation wizard displays.
6 Follow onscreen instructions in the
installation wizard.
Click Finish.
3
Turn printer on.
Pull pink tab to remove clear tape from print
2
cartridges.
Do not touch copper strip.
7
Close top cover.
USB
The installation wizard
displays.

Advertising

   Related Manuals for HP 900

   Summary of Contents for HP 900

  • Page 1: Setup Guide

    Windows Setup Guide HP 900 Inkjet Printer Remove ALL tape and cardboard packing material. Plug in power supply. Turn printer on. Slide paper guide to the left. Pull out extension. Open top cover. Pull pink tab to remove clear tape from print Load white paper.

  • Page 2

    3. Temporarily disable any software firewall or close any anti-virus software. Re-start these programs after the printer is installed. Printed in Thailand 04/2006 © 2006 Hewlett-Packard Development Company, LP. Windows ® is a registered trademark of Microsoft Corporation.

Comments to this Manuals

Symbols: 0
Latest comments: