Automatic Redial; Batch Transmission - Ricoh Aficio MP 3500SP Facsimile Reference Manual

Transmission

Automatic Redial

If a fax document could not be sent because the line was busy or an error oc-
curred during transmission, the line is switched to another at five-minute inter-
1
vals and redial is attempted up to five times.
If redialing fails after four redials, the machine cancels the transmission and
prints a Communication Result Report or Communication Failure Report.
Note
❒ If there are a large number of files stored in memory, documents might not be
sent in the order they were scanned.
Reference
p.205 "Communication Result Report (Memory Transmission)"
p.207 "Communication Failure Report"

Batch Transmission

If you send a fax document by Memory Transmission and there is another fax
document waiting in memory to be sent to the same destination, that document
is sent along with your original.
Several fax documents can be sent with a single call, thus eliminating the need
for several separate calls. This helps save communication costs and reduce trans-
mission time. Fax documents whose transmission time was set in advance are
sent by batch transmission when that time is reached.
Important
❒ This function is not available with Internet Fax and IP-Fax.
Note
❒ You can turn this function on or off with the User Parameters (switch 14, bit 2)
in the Facsimile Features menu.
❒ The originals to be transmitted at a specific time is sent at that time.
❒ If fax memory is overloaded, documents may not be sent in the order they
were scanned.
Reference
"Facsimile Features", General Settings Guide
20