Controls Panel - Haier Hf-220Waa Instructions For Use Manual

FUNCTIONS

Controls panel

NO FROST
A2
A3
Start-up
Please note: The high temperature
after 3 hours if the freezer
Insert the plug in the socket to switch on the freezer , at this time the C grid is showing the actual temperature
inside the freezer,
The alarm led F and acoustic signal will indicate that the temperature
for storage of foodstuffs. Pressing the button A3 to choose the "Alarm" function then press the button A4,
you can disable acoustic signal, but warning light will be on till freezer will reach the temperature
When display show the temperature
ready for food storage.
Check the Controls Panel:
Touch any button on the display screen and check whether the temperature area and the selected icon can
illuminate.
Set temperature:
T O set temperature, push the button A2. During temperature
point set in flashing mode. Additional pressing on this button modify the set-point in cycling and decreasing
mode from —14'C to —260C.
If no action is done on the 0K button within
After the temperature is setethe two numbers on display come back to the freezer temperature visualization.
Manufacturer setting of temperature
to be adjusted.
Power function:
s Pres the button A4 for 5 sec to turn off the power Of the freezer; do it again the power will be turned on.
Before any cleaning operation, make sure to disconnect the freezer from the power supply by pulling
out the plug, it isn't enough to turn off the appliance pushing power button.
c
c
D
F
G
A4
alarm will not sound when the freezer is first switch on.lt will only sound
hs not colled down below
of OOC, a larm condition
5 sec, the set point will be stored automatically,
is -189C we recommend that you use the default setting,it does ont need
Freezing temperature
Eco function icon
Fast freezing icon
Alarm indicator icon
Child lock icon
Temperature setting button
Function selection button
(eco/ fast freezing/ alarm/child lock)
0K button / Power button
O "Cl
inside freezer is not sufficiently cold
will stop automatically
setting two numbers on display show the
display icon
and freezer will be
of CIOC,