Page 1
The ADA-1 Automatic Damper Adapter is intended for use with boilers and water heaters having a 24V automatic vent or flue damper. The ADA-1 simplifies the control wiring connections to Field Controls combustion air/venting equipment by using the appliance’s damper control cable. The appliance’s damper cable is simply plugged into the ADA-1’s corresponding receptacle, and the ADA-1’s damper cable is plugged into the damper’s receptacle instead.
Page 2
6. To complete the installation, complete the line-voltage wiring to the combustion air/venting equipment being installed, following the installation instructions for the particular equipment. Be sure to replace all wiring covers. 7. Complete the checkout procedure for the equipment being installed, following the instructions for the particular equipment. Page 2 P/N 46474000 10/04...
This manual is also suitable for:
Sas-1200dSas-1500dSas-2500dSas-3500dSas-5000dSax-150.2...
Show all