Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS
BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below•
Used to clear any
except the time of
day and minute timer. Press STOP CLEAR to
stop cooking. Also the STOP CLEAR pad is
used to activate
oven lockout setting.
to select the bake
to select the variable
Used to select the Self-
Cleaning cycle. A 2 or 3
may be selected.
UP and DOWN ARROWS
PADS Used along
with the function
pads to select oven temperature,
PAD Used to
cook time, start time (when programming
set the time of
start time), time of day, clean time and
& DOOR LOCK LIGHTS*
light will glow
each time the oven unit turns on to maintain
the set oven temperature.
light will glow when the oven is first set to operate, or if
the desired temperature
is reset higher than the actual oven temperature.
light will flash until the door locks when the self-
clean cycle is in use. it glows constantly
after the door locks.
to show which feature is
COOK TiME PAD
Used to enter the
of the baking
STOP TiME PAD
Used to set the
desired stop time
for baking. May be
used with COOK
TIME to program a
set or cancel the minute timer.
The minute timer does not start
or stop cooking.
Pad is used to set the
*Note:The OVEN indicator light On the electionic display will tUrn ON and OFF when using the Bake feature and during
preheat. Thi s is normal and indicates that the oven is cycling to maintain the selected baking temperaturel When the
preheat indicator light turns OFF, your oven is ready.
For a silent
When choosing a function, a beep will be heard each time a pad is pressed• If desired, the control can be programmed
hold ......... After 7 seconds, the control will beep once• This will block the controls from
for silent operation• Press and
sounding when a pad is pressed• To return the sound, press and hold
again for 7 seconds until the control beeps
Note: The control will return to the audible mode after a power outage•
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory• The oven can be
programmed for any temperature from 170 °F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
not be in a Bake or Clean mode):
"-- --" appears in the display.
Press and hold the A
until "HI" appears in the display,
Press and hold
until °F or
appears in the display,
Press the A
to change °F to °C or °C to °F.
Press any control pad to return to normal operating mode,