Dos Flash Utility - Acer AO756 Service Manual

DOS Flash Utility

NOTE:
Plug the AC power adaptor to a power source before performing the DOS Flash Utility.
Perform the following to use the DOS Flash Utility:
In Windows OS, unzip the compressed BIOS ROM package (e.g. in this case,
1.
"Q1VZC102.zip").
Copy the folder "Q1VZC102" to the root directory of the DOS-bootable USB flash disk.
2.
Reboot the system and press F2 during boot to enter the BIOS Setup Utility.
3.
Select Boot menu to modify the boot priority order.
4.
Move the USB HDD to position 1 (refer to
5.
Information Main
Boot priority order:
1. HDD0 : Hitachi HTS543232A7A3B4
2. ATAPI CDROM :
3. USB FDD :
4. Network Boot : BRCM MBA Slot 0400 v15.0.11
5. USB HDD :
6. USB CDROM :
F1 Help
Esc Exit
2-13
Q1VZC102.zip
Figure 2:12. Copy Folder to USB Disk
Security Boot
Select Item
Select Menu
Figure 2:13. Changing the BIOS Boot Priority Order
Q1VZC102
BIOS.bat
Q1VZC102.bin
Boot on page 2-10).
InsydeH20 Setup Utility
Exit
F5/F6 Change Values
Enter Select Sub-Menu
Item Specific Help
Use < > or < > to select a device, then
press <F5> to move it down the list, or
<F6> to move it up the list. Press <Esc>
to escape the menu
F9 Setup Defaults
F10 Save and Exit
System Utilities
Rev. 3.7