Bank Names; Volume Pedal Update; Factory Reset - DigiTech RP21D User Manual

Bank Names

You can assign custom names to every Bank in the RP21D. The Procedure for naming your Banks is as follows:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 12 of the utilities. The Display reads:
2. Press the number two button and rotate the Data Wheel to select the Bank that you wish to rename.
3. Press the number four button and rotate the Data Wheel. This will take you to the Name menu. Please see page 47 for Naming
instructions.

Volume Pedal Update

The RP21D has the ability to update the position of the expression controller pedal when it is assigned to Volume within any program. This
means that the volume pedals position will correspond to the volume setting after changing the ProgramTo enable this feature, the procedure
is as follows:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 16. This display should look like this:
2. To enable this Volume Pedal update rotate the Data Wheel until the display says On.
Now in any Program where the expression pedal is assigned to the Volume parameter, the expression pedal's current position will be
updated when that preset is selected.

Factory Reset

This function resets the RP21D to its original factory settings. This procedure will erase all custom user Programs, Defaults and Utility
settings.
ATTENTION: This procedure will erase all user settings in the RP21D. Be sure you want to erase the memory and start fresh
before continuing with this procedure.
To perform a Factory Reset, do the following:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page13 of the utility menu. The Display reads:
2. To initiate the Reset, press the number one button. The Display reads:
2
Bank: Showcase
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE
DIST
FACTORY USER
b
12 15
PAGE OF
2
Vol Pedal Update
dn
Off
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE
DIST
FACTORY USER
b
13 15
PAGE OF
2
Factory Reset?
Yes
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE
FACTORY USER DIST
b
14 15
PAGE OF
RP21D User's Guide
Name?
1 1 Yes
3 4
LINK CHANGED LINK CHANGED
EQ GATE
L/R OUTS
EQ
#
DIGITAL
CLIP L/R OUTS
1
1
3 4
LINK CHANGED LINK CHANGED
EQ GATE
L/R OUTS
EQ
#
DIGITAL
CLIP L/R OUTS
1 1
3 4
LINK CHANGED LINK CHANGED
EQ GATE
L/R OUTS
EQ
#
DIGITAL
CLIP L/R OUTS
Section Four - Utilities
59