Plan Your Installation: Tools Needed, Materials Needed - Kenmore 625.383760 Owner's Manual

PLAN YOUR INSTALLATION
It is recomended to read through the entire manual before
beginning your installation. Follow all steps exactly. Reading this
manual will also help you get all the benefits from your system.
TOOLS NEEDED:
• Safety glasses
• Flathead screw driver
• Phillips screw driver
• Adjustable slip joint pliers
• Tape measure or ruler
Safety Glasses
ADDITIONAL TOOLS NEEDED FOR THE FOLLOWING INSTALLATIONS:
SOLDERED COPPER
• Tubing Cutter
• Propane Torch
• Solid Core LEADFREE Solder
• Paste Flux
• Emery Cloth
or Sandpaper
THE PROPER ORDER TO INSTALL WATER TREATING EQUIPMENT
Sediment or Taste &
Odor Cartridge Filter
Cold, soft water
Hot, soft water
Water
Heater
• Always put an Iron Filter BEFORE the water softener.
• Always put a Neutralizer BEFORE an Iron Filter, etc., as shown.
* A Taste & Odor Filter may be used before or after the water
softener.
6
Plan Your Installation
Flathead Screwdriver
THREADED PIPE
• Hacksaw or Pipe Cutter
• Pipe Wrenches
• Pipe Threading Tool
• Pipe Joint Compound approved
for use on potable water
(Shows sequence of equipment only. Seldom, if ever, would all items be needed.)
Kitchen or Bathroom
Cold Faucet
Water *Taste & Iron
Softener Odor Filter Filter
Questions? Call The Kenmore Water Line 1-800-426-9345
Phillips Screwdriver Adjustable Slip Joint Pliers
Hard Water to
Outside Faucets
Sediment
Cartridge Filter
(Optional
Location)
Neutralizer Clarifying
Filter
Tape Measure or Ruler
CPVC OR PVC PLASTIC
• Hacksaw
• Adjustable Wrench
• Primer and Solvent Cement
approved for use on potable water-
City Water Supply
OR
Well Water Supply
Dispensing
Pressure or
Captive Air
Tank
Blending
Tank
Solution
System
Well Water
FIG. 2