Adding Variations To The Sound - Reverb; Adjusting Reverb Depth - Yamaha 141 Owner's Manual

Selecting & Playing Voices
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create
a realistic acoustic ambience.
Selecting a reverb type
While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a
reverb type.
The lowest key
Key Reverb Type
C2 Room
C 2 Hall1
D2 Hall2
D 2 Stage
E2 Off

Adjusting reverb depth

Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while
holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.
The lowest key
While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the
depth most suitable for the selected voice.
18
YDP-161/141 Owner's Manual
Description
This setting adds a continuous reverb effect to the sound,
similar to the acoustic reverberation you would hear in a
room.
For a "bigger" reverb sound, use the HALL 1 setting. This
effect simulates the natural reverberation of a small-size
concert hall.
For a truly spacious reverb sound, use the HALL 2 setting.
This effect simulates the natural reverberation of a large
concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
C 2 D 2
C2 D2 E2
G 4: depth 20
C3: depth 0
The depth value increases as you
press higher keys.
The default reverb type
(including OFF) and depth
settings are different for each
voice.
Reverb depth range:
0 (no effect)-20 (maximum
depth)
A4