Identify the connectors of your USB cable, and connect them.
Turn your multifunction terminal on.
The add device wizard is displayed.
Click N
.
EXT
Select F
(
). Click
IND THE APPROPRIATE DRIVER FOR MY DEVICE
RECOMMENDED
N
.
EXT
Select the location where the system is to look for the driver. Only check the CD-
ROM
box if the Windows asks where the drivers are located. Click N
.
DRIVES
EXT
The search takes a few moments.
A window indicates that the driver has been found. Click N
.
EXT
A window tells you that the software has been installed. Click F
.
INISH
If the Wizard is displayed again, refer to the third step of this procedure and
follow the instructions. This procedure has to be carried out a total of three
times.
You can now use the multifunction terminal to print or scan your documents.
- 24 -