Manually adding a device connected to the network
Add manual lets you add a device directly using its IP address or its NetBIOS name
and manage it on a subnetwork other than the one on which your PC is situated.
To add a device manually, click A
.
DD MANUALLY
The "Add manually a device" window lets you enter the NetBIOS name or IP address
of a device.
Note: The IP address can vary depending on the configuration of the device. You
are recommended to use the NetBIOS name to identify the device.
When a device is registered using its IP address, a confirmation message asks if you
want to use its NetBIOS name if the device is on the same subnetwork as the PC. To
use the NetBIOS name with devices situated on different subnetworks, the PC and
the device need to be registered on a WINS server.
- 20 -